Publication

Scopus Journal

Scopus Proceeding

Prof. Dr. Kahar Osman →)
Prof. Dr. Ida Idayu Muhamad
→)
Prof. Ir. Dr. -Eng. Eko Supriyanto →)
Dr. Ahmad Zahran Md. Khudzari →)
Dr. Syafiqah Saidin →)
Dr. Hau Yuan Wen →)

Kahar Osman

Yamaguchi R., Tanaka G., Shafii N.S., Osman K., Shimizu Y., Saqr K.M., Ohta M. Characteristic effect of wall elasticity on flow instability and wall shear stress of a full-scale, patient-specific aneurysm model in the middle cerebral artery: An experimental approach,  Journal of Applied Physics, 2022, 131:184701.
Yamamoto T.,  Ichihashi T., Ishida S., Normura E., Kori, M.I., Osman K. Pulsatile flow interaction between aorta and pulmonary artery, Malaysian Journal of Medicine and Health Sciences, 2022, 18:12–16.
Thomas S.A., Md Khuzari A.Z., Abdul Kadir M.R., Osman K, Jeswant D., Taib I. The effect of spiral inducing chamber to left ventricular assist device outflow cannula, International Journal of Integrated Engineering, 2022, 14:62–67.
Cupu D.R.P., Osman K. Numerical analysis of the effect of temperature on the pressure and film thickness for line contact elastohydrodynamic lubrication using bio-based oils as lubricants, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 2022, 92:90–104.
Hamid M.N., Osman K., Mohd Salleh Z., Rusli R.E., Kori M.I., Khudzari A.Z.M. Effect of airway stent on stenosed trachea, Lecture Notes in Mechanical Engineering, 2022, 183–191. 
Mustafa F.M., Shafli N.S., Kadir M.R.A., Aziz M.N.C., Osman K., Dillon J., Darlis N., Khudzari A.Z.M. The effect of parameter variation on spiral flow inducing cannula performances, 2021, Journal of Physics: Conference Series, 2071.
Salleh, Z.M., Osman, K., Marian, M.F., Hassan, N.N.M., Madon, R.H., Samiran, N.A., Rashid, R.A., Ishak, I.A., Darlis, N. Rapid prototyping 3D model for PIV: Application in human trachea model flow analysis, 2021, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79.
Teh, Y.M., Lim, S.K., Jusoh, N., Osman, K., Mualif, S.A. CD80 Insights as therapeutic target in the current and future treatment options of frequent-relapse minimal change disease, 2021, BioMed Research International.
Rashid, A.M.A., Osman, K., Kadir, M.R.A., Ramlee, M.H. Development and verification of three-dimensional model of human foot for badminton insole analysis: A finite element study, 2020, 4th International Symposium on Multidisciplinary Studies and Innovative Technologies.
Ali, N., Osman, K., Zawawi, F.M., Yazid, M.N.A.W.M. The effect of flow variations to vibration tendency in a hydraulic manifold, 2020, IOP Conference Series: Materials Science and Engineering, 884.
Shafii, N.S., Yamaguchi, R., Khudzari, A.Z.M., Tanaka, G., Saitoh, A., Ohta, M., Osman, K. Hemodynamic and flow recirculation effect on rupture prediction of middle cerebral artery aneurysm, 2020, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79.
Isa, K.M., Osman, K., Abdullah, N.R., Othman, N.F., Ahmad, N. Coal type, temperature and gasifiying agent effects on low-rank coal gasification using CFD method, 2020, CFD Letters, 12.
Selamat, U., Osman, K., Rahim, A.A. Heat and flow analysis of a chilled water storage system using computational fluid dynamics, 2019, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57.
Ichihashi, D., Iinuma, M., Yamamoto, T., Kori, M.I., Osman, K.B. Hemodynamic characteristics in aorta-pulmonary artery system, 2019, IOP Conference Series: Materials Science and Engineering, 501.
Isa, K.M., Osman, K., Yahya, A., Ghaffar, Z.A., Hamid, A.H.A., Kasolang, S. Studies on the spray characteristics of pressure-swirl atomizers for automatic hand sanitizer application, 2019, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55.
Zakaria, M.S., Zainudin, S.H., Abdullah, H., Yuan, C.S., Latif, M.J.A., Osman, K. CFD Simulation of non-Newtonian effect on hemodynamics characteristics of blood flow through benchmark nozzle, 2019, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64.
Empaling, S., Md Khudzari, A.Z., Kadir, M.R.A., Osman, K., Hudzari, A.H.M., Padzillah, M.H., Talib, I.A., Taib, M.E.A., Rahim, A.A.A. Spiral groove bearing geometry variation effect on left ventricular assist device impeller performance, 2019, CFD Letters, 11.
Isa, K.M., Osman, K., Abdullah, N.R., Othman, N.F., Hamid, M.N. Gasifying agents type at lower temperature effect on bubbling fluidised bed gasification for low rank coal, 2019, Progress in Computational Fluid Dynamics, 19.
Darlis, N., Osman, K., Padzillah, M.H., Dillon, J., Md Khudzari, A.Z. Modification of aortic cannula with an inlet chamber to induce spiral flow and improve outlet flow, 2018, Artificial Organs, 42.
Kaha, A., Taib, I., Paisal, M.S.A., Arifin, A.M.T., Ismail, A.E., Asmuin, N., Haq, R.H.A., Chatpun, S., Yamamoto, T., Osman, K. Lumped parameter modelling in femoral popliteal artery for normal and severe conditions, 2018, International Journal of Integrated Engineering, 10.
Yamamoto, T., Ishimaru, K., Osman, K., Kori, M.I., Khudzari, A.Z., Taib, I., Yamamoto, T. Numerical simulation of concentration over-voltage in a polymer electrolyte fuel cell under low-hydrogen conditions, 2018, International Journal of Integrated Engineering, 10.
Kadir, M.R.A., Aziz, M.A.A., Padzillah, M.H., Harun, M.N., Osman, K., Rahim, A.A.A., Taib, M.E.A., Khudzari, A.Z.M. Numerical study of a Left Ventricular Assist Device (LVAD) with different blade heights and tip clearances, 2018, International Journal of Integrated Engineering, 10.
Thomas, S.A., Empaling, S., Darlis, N., Osman, K., Dillon, J., Taib, I., Md Khudzari, A.Z.  Computational modelling of flow and tip variations of aortic cannulae in cardiopulmonary bypass procedure, 2017, IOP Conference Series: Materials Science and Engineering, 243.
Sufyan Amir Paisal, M., Azmi Wahab, M., Taib, I., Mat Isa, N., Ramli, Y., Md Seri, S., Darlis, N., Osman, K., Zahran Md Khudzari, A., Nordin, N. Flow behaviour in normal and Meniere’s disease of endolymphatic fluid inside the inner ear, 2017, IOP Conference Series: Materials Science and Engineering, 243.
Selamat, U., Osman, K., Rashid, A.M., Kusnin, N.H.A. Evaluation of integrated Malaysian meteorological data atmospheric dispersion software (IMMDADS), 2017, Advanced Science Letters, 23.
Salleh, Z.M., Osman, K., Yamamoto, T. Investigation on the effect of stenosis in respiratory airflow in human airway by particle image velocimetry, 2017, Advanced Science Letters, 23.
Salleh, Z.M., Osman, K., Kadir, M.R.A. Comparative study of the computational fluid dynamics and fluid structure interaction analysis in human airways flow, 2017, ARPN Journal of Engineering and Applied Sciences, 12.
Kori, M.I., Osman, K., Taib, I. Hemodynamic prediction in patent ductus arteriosus morphologies, 2017, ARPN Journal of Engineering and Applied Sciences, 12.
Kori, M.I., Jamalruhanordin, F.L., Taib, I., Mohammed, A.N., Abdullah, M.K., Ariffin, A.M.T., Osman, K. Wall shear stress distributions on stented patent ductus arteriosus, 2017, AIP Conference Proceedings, 1831.
Md Isa, K., Osman, K., Othman, N.F., Abdullah, N.R., Hamid, M.N. A multiphase Eulerian-Eulerian CFD simulation of fluidized bed gasification using Malaysian low-rank coal-merit pila, 2017, Key Engineering Materials, 740.
Ngali, Z., Huzaimi, N., Ying, E.P., Osman, K. Four-dimensional simulation of particle transportation in simplified passageways system, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
Lau, P.S., Osman, K., Yeak, S.H. A review on the requirements of modelling of blood flow, 2015, Proceedings – 2015 2nd International Conference on Biomedical Engineering (ICoBE 2015).
Taib, I., Hao, K.S., Shafii, N.S., Khudzari, A.Z.M., Osman, K. Finite element analysis for stent in patent ductus arteriosus (PDA), 2015, Proceedings – 2015 2nd International Conference on Biomedical Engineering (ICoBE 2015).
Johari, N.H., Osman, K., Helmi, N.H.N., Abdul Kadir, M.A.R. Comparative analysis of realistic CT-scan and simplified human airway models in airflow simulation, 2015, Computer Methods in Biomechanics and Biomedical Engineering, 18.
Ngali, M.Z., Osman, K., Zakaria, N.H. Non-dimensional distribution pattern analysis of particle transportation in simplified pipeline system, 2015, Jurnal Teknologi, 77.
Ngali, M.Z., Manshoor, B., Khalid, A., Kahar, O., Azis, M.H.S.A. Matrix-based simulation for patient-specific human respiratory air-particle flow analysis, 2014, Proceedings – 1st International Conference on Artificial Intelligence, Modelling and Simulation (AIMS 2013).
Zakaria, M.S., Osman, K., Yusof, A.A., Mohd Hanafi, M.H., Saadun, M.N.A., Manaf, M.Z.A. Parametric analysis on boil-off gas rate inside liquefied natural gas storage tank, 2014, Journal of Mechanical Engineering and Sciences, 6.
Ngali, M.Z., Zakaria, N.H., Osman, K., Khalid, A., Manshoor, B., Zaman, I. Gravitational effect formulation on in-house air-particle flow solver, 2014, Applied Mechanics and Materials, 660.
Shafii, N.S., Darlis, N., Dillon, J., Osman, K., Khudzari, A.Z.M. The effect of internal profile on cannula outflow, 2014, WSEAS Transactions on Fluid Mechanics, 9.
Muhammadu, M.M., Osman, K., Hamzah, E. Numerical methodology to determine fluid flow pattern with corrosion in pipe bends using computational fluid dynamics software, 2014, ARPN Journal of Engineering and Applied Sciences, 9.
Muhammadu, M.M., Sheriff, J.M., Osman, K., Hamzah, E., Shehu, A.M. Application of solar energy for water supply and sanitation in arsenic affected remote areas: A case of Bataiwa, Nigeria, 2014, Jurnal Teknologi (Sciences and Engineering), 68.
Wan Ab Naim, W.N., Ganesan, P.B., Sun, Z., Osman, K., Lim, E. The impact of the number of tears in patient-specific Stanford type b aortic dissecting aneurysm: CFD simulation, 2014, Journal of Mechanics in Medicine and Biology, 14.
Taib, I., Kadir, M.R.A., Azis, M.S.A., Khudzari, A.Z.M., Osman, K. Analysis of hemodynamic differences for stenting patent ductus arteriosus, 2013, Journal of Medical Imaging and Health Informatics, 3.
Giuma, S.K.B., Osman, K., Kadir, M.R.A. Fluid structure interaction analysis in abdominal aortic aneurysms: Influence of diameter, length, and distal neck, 2013, Journal of Medical Imaging and Health Informatics, 3.
Zakaria, M.S., Osman, K., Saadun, M.N.A., Manaf, M.Z.A., Mohd Hanafi, M.H. Computational simulation of boil-off gas formation inside liquefied natural gas tank using evaporation model in ANSYS fluent, 2013, Applied Mechanics and Materials, 393.
Cupu, D.R.P., Bahari, A., Osman, K., Md Sheriff, J. Numerical analysis of elastohydrodynamic lubrication with non-Newtonian lubricant, 2013, Applied Mechanics and Materials, 388.
Ubaidullah, S., Osman, K. Natural convection in a differentially heated cavity using splitting method, 2013, Applied Mechanics and Materials, 388.
Taib, I., Osman, K., Hermawan, H., Abd Kadir, M.R. Preliminary study on the comparable flow pattern between stented and non-stented aneurysm at hypertension condition, 2013, Applied Mechanics and Materials, 388.
Johari, N.H., Basri, W.M., Osman, K., Salleh, Z., Helmi, M.H., Kadir, M.R.A. The effect of tracheal stenosis at different locations and sizes on airflow in the trachea and main bronchi: A numerical modeling analysis , 2013, Advanced Science Letters, 19.
Adib, M.A.H.M., Naim, F., Hasni, N.H.M., Osman, K. Prediction on behaviour of blood velocity and mitral leaflet displacement in the different shapes of heart valve during cardiac cycle, 2013, Journal of Biomimetics, Biomaterials, and Tissue Engineering, 17.
Bahari, A., Sheriff, J.M., Osman, K. The effect of wavy groove liner on pressure distribution of journal bearing, 2013, Applied Mechanics and Materials, 315.
Zakaria, M.S., Osman, K., Abdullah, H. Greenhouse gas reduction by utilization of cold LNG boil-off gas, 2013, Procedia Engineering, 53.
Zakaria, M.S., Osman, K., Musa, M.N.M. Boil-off gas formation inside large scale liquefied natural gas (LNG) tank based on specific parameters, 2012, Applied Mechanics and Materials, 229-231.
Cupu, D.R.P., Osman, K., Sheriff Md, J. Numerical approach of elastohydrodynamically lubricated line contact with seed oils, 2012, International Journal of Simulation: Systems, Science and Technology, 13.
Johari, N.H., Osman, K., Basri, W.M., Ngali, Z. Effect of tracheal stenosis at different locations on airflow in the trachea and main bronchi, 2012, AIP Conference Proceedings, 1440.
Musa, Md.N., Osman, K., Hamat, A.M.A. Computational analysis of flow field around Ahmed car model passing underneath a flyover, 2012, AIP Conference Proceedings, 1440.
Jong, R.P., Osman, K., Adib, M.A.H.M. Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images, 2012, AIP Conference Proceedings, 1440.
Mokhtar, N.H., Yaakob, M.S., Osman, K., Kadir, M.R.A., Abdullah, W.K.W., Haron, J. Flow modeling of actual human nasal cavity for various breathing conditions, 2012, AIP Conference Proceedings, 1440.
Hadzri, E.A., Shamsudin, A.H., Osman, K., Abdul Kadir, M.R., Aziz, A.A. Effects of irregular cerebrospinal fluid production rate in human brain ventricular system, 2012, AIP Conference Proceedings, 1440.
Osman, K., Ngali, Z., Johari, N.H. Splitting solver with immersed boundary extension for the analysis of backward-facing step flow, 2012, AIP Conference Proceedings, 1440.
Ali, Z., Ubaidullah, S., Zahid, M.N., Osman, K. Numerical prediction on the dispersion of pollutant particles, 2012, AIP Conference Proceedings, 1440.
Taib, I., Amirnordin, S.H., Madon, R.H., Mustafa, N., Osman, K. The effect of flow recirculation on abdominal aortic aneurysm, 2012, AIP Conference Proceedings, 1440.
Sheriff, J.Md., Osman, K., Asral. Effect of semi-circular wavy liner on performance of journal bearing, 2012, AIP Conference Proceedings, 1440.
Syahirah, S., Osman, K., Redzuan, K., Ngali, Z., Hadi, N. Unsteady pressure fluctuation for internal flow in a cylinder using LES model, 2012, AIP Conference Proceedings, 1440.
Hassan, W.A.W., Osman, K., Kadir, M.R.A., Abdullah, W.A.K.W., Haron, J., Ngali, M.Z. Effect of anastomosis angle on hemodynamic of side-to-end radiocephalic arteriovenous fistula (RCAVF), 2012, AIP Conference Proceedings, 1440.
Cupu, D.R.P., Sheriff, J.Md., Osman, K. Bio-based lubricants for numerical solution of elastohydrodynamic lubrication, 2012, AIP Conference Proceedings, 1440.
Cupu, D.R.P., Sheriff, J.M., Osman, K. Bio-based lubricants for numerical solution of elastohydrodynamic lubrication, 2012, Jurnal Teknologi (Sciences and Engineering), 58.
Johari, N.H., Osman, K., Mohd Salleh, Z., Haron, J., Abdul Kadir, M.R. The effect of different locations of tracheal stenosis to the flow characteristics using reconstructed CT-scanned image, 2012, Journal of Mechanics in Medicine and Biology, 12.
Adib, M.A.H.M., Mohd Hasni, N.H., Osman, K., Maskon, O. Analysis on rigidity of mitral valve leaflet (MVL) and backflow problems during cardiac cycle, 2012, Journal of Biomimetics, Biomaterials, and Tissue Engineering, 13.
Ali, Z., Ubaidullah, Zahida, M.N., Osman, K. Optimization of stack emission parameters using Gaussian plume model, 2012, Jurnal Teknologi (Sciences and Engineering), 58.
Musa, M.N., Osman, K., Hamat, A.M.A. Renewable energy from induced airflow generated by cruising ground vehicles in tandem using RANS, 2012, Energy Procedia, 14.
Md Sheriff, J., Osman, K., Cupu, D.R.P. Numerical analysis of line contact elastohydrodynamic lubrication with biobased oils, 2011, Proceedings – AMS 2011: Asia Modelling Symposium 2011 – 5th Asia International Conference on Mathematical Modelling and Computer Simulation.
Osman, K., Basri, W.M., Johari, N.H., Rafiq, M. The effect of mild stenosis to flow in trachea, 2010, CSSR 2010 – 2010 International Conference on Science and Social Research.
Salleh, Z.M., Johari, N.H., Osman, K., Haron, J., Rafiq, M. Simulation of stenosis effect on airflow pattern in trachea and main bronchi, 2010, CSSR 2010 – 2010 International Conference on Science and Social Research.
Ngali, M.Z., Osman, K., Azis, M.H.S.A. Multi-bifurcation flow analysis on 2D human respiratory airway system, 2010, CSSR 2010 – 2010 International Conference on Science and Social Research.
Johari, N.H., Helmi, N.H.N., Osman, K. Comparison of simplified and actual model of trachea and main bronchi in airflow simulation, 2010, CSSR 2010 – 2010 International Conference on Science and Social Research.
Adib, M.A.H.M., Osman, K., Jong, R.P. Analysis of blood flow into the main artery via mitral valve: Fluid structure interaction model, 2010, CSSR 2010 – 2010 International Conference on Science and Social Research.
Md Sheriff, J., Osman, K., Asral Effect of circumferential groove sinusoidal waviness on the load carrying capacity of journal bearing with bio-based lubricant, 2010, CSSR 2010 – 2010 International Conference on Science and Social Research.
Osman, K., Sheriff, J.Md., Zainal, M.F.B., Matzin, A.N.B., Asral. Numerical analysis of flow and heat in variable angle slider bearing, 2010, AIP Conference Proceedings, 1225.
Osman, K., Jong, R.P., Shariff, M.S. Numerical dynamic simulation of optimized cross-flow heat exchanger with various refrigerants ,2010, AIP Conference Proceedings, 1225.
Sheriff, J.Md., Osman, K., Kar, S.B.C., Asral. Pressure analysis in point contact for elastohydrodynamic lubrication, 2010, AIP Conference Proceedings, 1225.
Osman, K., Sheriff, J.Md., Bahak, Mohd.Z., Bahari, A., Asral. Numerical solution of hydrodynamics lubrications with non-Newtonian fluid flow, 2010, AIP Conference Proceedings, 1225.
Osman, K., Padzillah, M.H., Ngali, M.Z. Accuracy and efficiency improvements of the Navier Stokes equation using modified splitting method, 2009, EMS 2009 – UKSim 3rd European Modelling Symposium on Computer Modelling and Simulation.
Ngali, M.Z., Osman, K. Splitting scheme for Eulerian-Lagrangian technique in the analysis of particle conformity to fluid flow, 2009, EMS 2009 – UKSim 3rd European Modelling Symposium on Computer Modelling and Simulation.
Osman, K., Su, M., Anwar, M., Ngali, M.Z. Thermal optimization of electronic equipment: Form factor improvement, 2009, EMS 2009 – UKSim 3rd European Modelling Symposium on Computer Modelling and Simulation.
Taib, I., Osman, K., Kadir, M.R.A., Padzillah, M.H. Risk of rupture analysis for advanced level of AAA under combined physiological and physical conditions, 2009, 2nd International Conference on Biomedical and Pharmaceutical Engineering (ICBPE).
Ariffin, M.K., Osman, K., Senawi, M.Y. Simulation of spherical encapsulated ice of thermal energy storage system during freezing, 2009, IE and EM 2009 – Proceedings 2009 IEEE 16th International Conference on Industrial Engineering and Engineering Management.
Badreddin, G.S.K., Osman, K., Kadir, M.R.A. Numerical modeling of fusiform aneurysm with high and normal blood pressure, 2009, Proceedings – 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009.
Giuma, B., Paramasivam, V., Osman, K., Abdul Kadir, M.R., Muthusamy, K. Graphical user interface (GUI) in matlab for solving the pulsatile flow in blood vessel, 2009, CFD Letters, 1.
Zamani, M., Kahar, O. Significance of splitting method in non-linear grid system for the solution of Navier-Stokes equation, 2009, World Academy of Science, Engineering and Technology, 38.
Osman, K., Al Khaireed, S.M.N., Ariffin, M.K., Senawi, M.Y. Dynamic modeling of stratification for chilled water storage tank, 2008, Energy Conversion and Management, 49.
Abdul Kadir, M.R., Taib, I., Osman, K., Abdul Hamid, M.H. Blood flow simulation of stented aneurysm model, 2008, IFMBE Proceedings, 21.
Abdul Kadir, M.R., Osman, K., Zainuddin, A.I. The use of mechanical interlock in dental prosthesis, 2008, IFMBE Proceedings, 21.
Osman, K.B., McHugh, J.P., Wei, T. Patterns in surface driven flows, 2008, Physics of Fluids, 20.

Ida Idayu Mohamad

Ching L.W., Keesan F.W.M., Muhamad I.I. Optimization of ZnO/GO nanocomposite-loaded polylactic acid active films using response surface methodology, Journal of King Saud University – Science, 2022, 34:101835.
Sabbagh F., Muhamad I.I., Niazmand R., Dilkshit P.K., Kim B.S. Recent progress in polymeric non-invasive insulin delivery, International Journal of Biological Macromolecules, 2022, 203:222–243.
Mutia R., Zaidel D.N.A., Muhamad I.I. Characterization of cocoa Butter equivalent from formulated hard palm oil mid-fraction and canola oil blend, 2021, IOP Conference Series: Earth and Environmental Science, 807.
Ching, L.W., Zulkipli, N.‘.M., Muhamad, I.I., Marsin, A.M., Khair, Z., Anis, S.N.S. Dietary management for healthier batter formulations, 2021, Trends in Food Science and Technology, 113.
Soo M.H., Samad N.A., Zaidel D.N.A., Jusoh Y.M.M., Muhamad I.I., Hashim Z. Extraction of plant based protein from Moringa oleifera leaves using alkaline extraction and osoelectric precipitation method, 2021, Chemical Engineering Transactions, 89.
Low X.Y., Yunus N.A., Muhamad I.I. Development of traceability system for seafood supply chains in Malaysia, 2021, Chemical Engineering Transactions, 89.
Yap, Q.J., Abang Zaidel, D.N., Mohd Jusoh, Y.M., Dailin, D.J., Hashim, Z., Salleh, E., Mohd Yusof, A.H., Muhamad, I.I. Optimisation of swietenia macrophylla seed oil extraction using ultrasound-assisted method, 2021, Chemical Engineering Transactions, 83.
Sabbagh, F., Kiarostami, K., Khatir, N.M., Rezania, S., Muhamad, I.I., Hosseini, F.Effect of zinc content on structural, functional, morphological, and thermal properties of kappa-carrageenan/NaCMC nanocomposites, 2021, Polymer Testing, 93.
Samat, A.A., Zaidel, D.N.K.A., Mat, D.A.A., Sharip, M.R.M., Muhamad, I.I., Then, Y.L.Surface current distribution and performance analysis of different feeding techniques for microstrip patch antenna, 2020 13th International UNIMAS Engineering Conference (EnCon 2020).
Leow, C.W., Bong, C.P.-C., Chua, L.S., Muhamad, I.I., Lee, C.T., Li, C., Klemeš, J.J.Feasibility study of composting and anaerobic digestion plant at community scale in Malaysia, 2020, Waste and Biomass Valorization, 11.
Marsin, A.M., Muhamad, I.I., Anis, S.N.S., Lazim, N.A.M., Ching, L.W., Dolhaji, N.H.Essential oils as insect repellent agents in food packaging: a review, 2020, European Food Research and Technology, 246.
Sharifzadeh, G., Hezaveh, H., Muhamad, I.I., Hashim, S., Khairuddin, N. Montmorillonite-based polyacrylamide hydrogel rings for controlled vaginal drug delivery, 2020, Materials Science and Engineering C, 110.
Mohammad, N.A., Zaidel, D.N.A., Muhamad, I.I., Hamid, M.A., Yaakob, H., Jusoh, Y.M.M.Biopolymeric encapsulation of probiotics for improved release properties in the gastrointestinal digestion system, 2020, IOP Conference Series: Materials Science and Engineering, 778.
Sabbagh, F., Kiarostami, K., Khatir, N.M., Rezania, S., Muhamad, I.I. Green synthesis of Mg0.99 Zn0.01O nanoparticles for the fabrication of κ-Carrageenan/NaCMC hydrogel in order to deliver catechin, 2020, Polymers, 12.
Khairuddin, N., Muhamad, I.I., Abd Rahman, W.A.W., Siddique, B.M. Physicochemical and thermal characterization of hydroxyethyl cellulose – Wheat starch based films incorporated thymol intended for active packaging, 2020, Sains Malaysiana, 49.
Muhamad, I.I., Muhamad, S.N.H., Salehudin, M.H., Zahan, K.A., Tong, W.Y., Pa’e, N. Effect of pandan extract concentration to chromium (IV) removal using bacterial cellulose-pandan composites prepared by in-situ modification technique, 2020, Materials Today: Proceedings, 31.
Marsin, A.M., Mohd Jusoh, Y.M., Abang Zaidel, D.N., Hashim, Z., Mohd Yusof, A.H., Muhamad, I.I. Microwave-assisted encapsulation of blue pea flower (Clitoria ternatea)colourant: Maltodextrin concentration, power, and time, 2020, Chemical Engineering Transactions, 78.
Ch’ng, C.H., Rahman, M.R.A., Muhamad, I.I., Pa’e, N., Zaidel, D.N.A. Optimization of bacterial cellulose production from pineapple waste using different fermentation method, 2020, Chemical Engineering Transactions, 78.
Ahmad, F., Mohd Jusoh, Y.M., Abang Zaidel, D.N., Jusoh, M., Zakaria, Z.Y., Muhamad, I.I.Optimisation of microwave-assisted encapsulation of black mulberry (Morus nigra) Extract, 2020, Chemical Engineering Transactions, 78.
Mohd Marsin, A., Muhamad, I.I. S application of box-behnken design with response surface methodology for optimizing oxygen colour indicator for active packaging, 2020, Malaysian Journal of Analytical Sciences, 24.
Mohammad, N.A., Abang Zaidel, D.N., Muhamad, I.I., Abdul Hamid, M., Yaakob, H., Mohd Jusoh, Y.M. Optimization of the antioxidant-rich xanthone extract from mangosteen (Garcinia mangostana L.) pericarp via microwave-assisted extraction, 2019, Heliyon, 5.
Khairuddin, N., Muhamad, I.I., Abdul Rahman, W.A.W., Mobin Siddique, B.Microbial study of pH sensitive starch based film using agar diffusion method (zone inhibition assay), 2019, IOP Conference Series: Materials Science and Engineering, 607.
Desrihastuti, Muhamad, I.I., Rahman, R.A., Sahyoga, G., Gafur, A. The effect of particle size of empty fruit bunch and ratio of biosludge of pulp and paper on biochemical changes in composting process, 2019, Jurnal Teknologi, 81.
Sulaiman, N., Ida Idayu, M., Ramlan, A., Nor Farahiyah, A.N., Taher, Z.M., Nor Rashidah, A., Mohamad, M.F. Enhancement of gaharu oleoresin quality by process optimization using response surface methodology, 2019, Biocatalysis and Agricultural Biotechnology, 18.
Pa’e, N., Muhamad, I.I., Hashim, Z., Yusof, A.H.M. Bacterial cellulose nanocomposites, 2019, Bio-based Polymers and Nanocomposites: Preparation, Processing, Properties & Performance.
Ngadiran, S., Muhamad, I.I., Aziz, R., Yaakob, H., Aman Nor, N.F., Yahayu, M., Ahmed, N.R., Jamil, M. Effect of solvent types on gaharu (Aqualaria malaccensis) extract quality and its chemical compound, 2019, Key Engineering Materials, 797.
Khozaid, N.’., Muhamad, I.I., Shaharuddin, S. Evaluation on quality attributes of pectin coated-cassava chips, 2019, Materials Today: Proceedings, 19.  Muhamad, I.I., Lazim, N.A.M., Selvakumaran, S. Natural polysaccharide-based composites for drug delivery and biomedical applications, 2019, Natural Polysaccharides in Drug Delivery and Biomedical Applications.
Zaidel, D.N.A., Muhamad, I.I., Daud, N.S.M., Muttalib, N.A.A., Khairuddin, N., Lazim, N.A.M.Production of biodiesel from rice bran oil, 2019, Biomass, Biopolymer-Based Materials, and Bioenergy: Construction, Biomedical, and other Industrial Applications, 409-447.
Muhamad, I.I., Abang Zaidel, D.N., Hashim, Z., Mohammad, N.A., Abu Bakar, N.F. Improving the delivery system and bioavailability of beverages through nanoencapsulation, 2019, Nanoengineering in the Beverage Industry: The Science of Beverages, 20.
Pa’e, N., Liew, W.C., Muhamad, I.I. Production of cellulose nano-crystals from bacterial fermentation, 2019, Materials Today: Proceedings, 7.
Muhamad, I.I., Zulkifli, N., Selvakumaran, S.A.P., Md Lazim, N.A. Bioactive algal-derived polysaccharides: Multi-functionalization, therapeutic potential and biomedical applications, 2019, Current Pharmaceutical Design, 25.
Tan, N.A.H., Muhamad, I.I. Green microwave-assisted aqueous enzymatic extraction of Elateriospermum tapos seed oils, 2019, Malaysian Journal of Analytical Sciences, 23.
Salehudin, M.H., Muhamad, I.I. Effect of graphene oxide and cellulose nanofiber towards mechanical properties of polylactic acid based active packaging using response surface methodology, 2018, Malaysian Journal of Analytical Sciences, 22.
Mohamad, S.N.H., Muhamad, I.I., Mohd Jusoh, Y.M., Khairuddin, N. Dielectric properties for selected wall material in the development of microwave-encapsulation-drying, 2018, Journal of Food Science and Technology, 55.
Daud, N.S.M., Zaidel, D.N.A., Lai, K.S., Khairuddin, N., Jusoh, Y.M.M., Muhamad, I.I. Crude oil yield and properties of rice bran oil from different varieties as affected by extraction conditions using soxhterm method, 2018, Arabian Journal for Science and Engineering, 43.
Selamat, S.N., Mohamad, S.N.H., Muhamad, I.I., Khairuddin, N., Md Lazim, N.A.Characterization of spray-dried palm oil vitamin E concentrate, 2018, Arabian Journal for Science and Engineering, 43.
Sabbagh, F., Muhamad, I.I., Nazari, Z., Mobini, P., Taraghdari, S.B. From formulation of acrylamide-based hydrogels to their optimization for drug release using response surface methodology, 2018, Materials Science and Engineering C, 92.
Sabbagh, F., Muhamad, I.I., Nazari, Z., Mobini, P., Mahmoudi Khatir, N. Investigation of acyclovir-loaded, acrylamide-based hydrogels for potential use as vaginal ring, 2018, Materials Today Communications, 16.
Muhamad, I.I., Zahan, K.A., Pa’e, N., Salehudin, M.H., Khairuddin, N., Marsin, A.M., Yusof, A.H.M., Salleh, E. Accelerated testing methodology for long-term life prediction of cellulose-based polymeric composite materials, 2018, Durability and Life Prediction in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites.
Idayu Muhamad, I. Revolutionizing therapeutic drug delivery: intelligent polymeric systems and hybrid nano-carriers, 2018, Materials Today: Proceedings, 5.
Muhamad, I.I., Jusoh, Y.M.M., Nawi, N.M., Aziz, A.A., Padzil, A.M., Lian, H.L. Advanced natural food colorant encapsulation methods: Anthocyanin plant pigment, 2018, Natural and Artifiial Flavoring Agents and Food Dyes: Handbook of Food Bioengineering, 7.
Aziz, A.A., Padzil, A.M., Muhamad, I.I. Effect of incorporating purple-fleshed sweet potato in biscuit on antioxidant content, antioxidant capacity and colour characteristics, 2018, Malaysian Journal of Analytical Sciences, 22.
Padzil, A.M., Aziz, A.A., Muhamad, I.I. Physicochemical properties of encapsulated purple sweet potato extract; effect of maltodextrin concentration, and microwave drying power, 2018, Malaysian Journal of Analytical Sciences, 22.
Jusoh, Y.M.M., Idris, A.A., Khairuddin, N., Zaidel, D.N.A., Hashim, Z., Mahmood, N.A.N., Zakaria, Z.Y., Muhamad, I.I. Effect of solvent pH, microwave power and extraction time on microwave-assisted extraction of hibiscus rosa-sinensis, 2018, Chemical Engineering Transactions, 63.
Leow, C.W., Van Fan, Y., Chua, L.S., Muhamad, I.I., Klemes, J.J., Lee, C.T. A review on application of microorganisms for organic waste management, 2018, Chemical Engineering Transactions, 63.
Li, K.S., Ali, M.A., Muhammad, I.I., Othman, N.H., Md Noor, A. The effect of microwave roasting over the thermooxidative degradation of Perah seed oil during heating, 2018, Journal of Oleo Science, 67.
Mohamad, S.N.H., Muhamad, I.I., Khairuddin, N., Jusoh, Y.M.M. Stability study of α-toc/β-CD powders obtained by microwave heating and encapsulation process, 2017, Journal of Thermal Analysis and Calorimetry, 130.
Sabbagh, F., Muhamad, I.I. Physical and chemical characterisation of acrylamide-based hydrogels, Aam, Aam/NaCMC and Aam/NaCMC/MgO, 2017, Journal of Inorganic and Organometallic Polymers and Materials, 27.
Zahidin, N.S., Saidin, S., Zulkifli, R.M., Muhamad, I.I., Ya’akob, H., Nur, H. A review of Acalypha indica L. (Euphorbiaceae) as traditional medicinal plant and its therapeutic potential, 2017, Journal of Ethnopharmacology, 207.
Khairuddin, N., Siddique, B.M., Muhamad, I.I. Physicochemical properties and antibacterial effect of lysozyme incorporated in a wheat-based active packaging film, 2017, Arabian Journal for Science and Engineering, 42.
Sabbagh, F., Muhamad, I.I. Acrylamide-based hydrogel drug delivery systems: Release of Acyclovir from MgO nanocomposite hydrogel, 2017, Journal of the Taiwan Institute of Chemical Engineers, 72.
Muhamad, I.I., Pa’e, N., Zahan, K.A. Sustainable and economical production of biocellulose from agricultural wastes in reducing global warming and preservation of the forestry, 2017, World Sustainability Series.
Muhamad, I.I., Sabbagh, F., Karim, N.A. Polyhydroxyalkanoates: A valuable secondary metabolite produced in microorganisms and plants, 2017, Plant Secondary Metabolites, Volume Three: Their Roles in Stress Eco-physiology.
Li, K.S., Ali, A., Muhammad, I.I. The influence of microwave cooking on the nutritional composition and antioxidant activity of the underutilized perah seed, 2017, Acta Scientiarum Polonorum, Technologia Alimentaria, 16.
Bahari, S.S., Heryansyah, A., Muhamad, I.I.B., Supriyanto, E. Effect of palm waste on sloping land to fresh fruit bunch production in oil palm plantation, 2017, Walailak Journal of Science and Technology, 14.
Daud, N.S.M., Zaidel, D.N.A., Song, L.K., Jusoh, Y.M.M., Muhamad, I.I., Ya’akob, H. Microwave-Assisted stabilisation and storage stability study of rice bran oil from different varieties, 2017, Chemical Engineering Transactions, 56.
Zaidel, D.N.A., Sahat, N.S., Jusoh, Y.M.M., Muhamad, I.I. Physicochemical properties and storage stability of margarine containing anthocyanins from roselle calyces, 2017, Chemical Engineering Transactions, 56.
Tan, N.A.H., Muhamad, I.I. Optimisation of omega 3 rich oil extraction from elateriospermum tapos seed by microwave assisted aqueous enzymatic extraction, 2017, Chemical Engineering Transactions, 56.
Shaharuddin, S., Zaidel, D.N.A., Hashim, Z., Muhamad, I.I. Thermotolerance study of bagasse-Alginate encapsulant using effective thermal conductivity model for sustainable probiotic feed, 2017, Chemical Engineering Transactions, 56.
Hashim, Z., Zaki, S.S.A.M., Muhamad, I.I. Quality assessment of fried palm oils using fourier transform infrared spectroscopy and multivariate approach, 2017, Chemical Engineering Transactions, 56.
Saifudin, N.A.A.M., Ali, T., Jusoh, Y.M.M., Zaidel, D.N.A., Muhamad, I.I., Khair, Z., Shaharuddin, S. Effects of ingredients ratio on physicochemical properties of convective-microwave nutritious dried rice meal, 2017, Chemical Engineering Transactions, 56.
Hassan, N.D., Muhamad, I.I. Drying and preservation of phytochemicals from elateriospermum tapos seed oil using combination of freeze drying and microwave technique, 2017, Chemical Engineering Transactions, 56.
Karim, N.A., Muhamad, I.I., Pae, N., Aziz, R.A. Effect of spray drying conditions on the antioxidant and physicochemical properties of clinacanthus nutans leaves extracts, 2017, Chemical Engineering Transactions, 56.
Arjmandi, R., Suib, N., Hassan, A., Muhamad, I.I., Pa’a, N., Zakaria, Z. Tensile and morphological properties of bacterial cellulose nanowhiskers reinforced polylactic acid nanocomposites, 2017, Chemical Engineering Transactions, 56.
Lazim, N.A.M., Muhamad, I.I. Encapsulation of vitamin E using maltodextrin/sodium caseinate/selenomethionine and its release study, 2017, Chemical Engineering Transactions, 56.
Maarasyid, C., Muhamad, I.I., Nik Mahmood, N.A., Zulfansyah. Solid fuel feedstock from leaves litter of industrial forestry in Riau, Indonesia, 2017, Materials Science Forum, 883.
Sabbagh, F., Muhamad, I.I. Production of poly-hydroxyalkanoate as secondary metabolite with main focus on sustainable energy, 2017, Renewable and Sustainable Energy Reviews, 72.
Mustapha, N., Khairuddin, N., Muhamad, I.I., Hashim, S., Siddique, M.B.M. Characterization of HEC/PANI film as a potential electroactive packaging with pH Sensor, 2016, Sains Malaysiana, 45.
Mohd Marsin, A., Muhamad, I.I. Effects of kappa carrageenan and glycerol in purple sweet potato starch based edible film, 2016, Jurnal Teknologi, 78.
John, A.A., Jaganathan, S.K., Supriyanto, E., Khudzari, A.Z.M., Muhamad, I.I. Novel green surface modification of metallocene polyethylene by steam to enhance its hemocompatible properties, 2016, Journal of Applied Polymer Science, 133.
Subramanian, A.P., Jaganathan, S.K., Mandal, M., Supriyanto, E., Muhamad, I.I. Gallic acid induced apoptotic events in HCT-15 colon cancer cells, 2016, World Journal of Gastroenterology, 22.
Abbaszadeh, S., Wan Alwi, S.R., Webb, C., Ghasemi, N., Muhamad, I.I. Treatment of lead-contaminated water using activated carbon adsorbent from locally available papaya peel biowaste, 2016, Journal of Cleaner Production, 118.
Muhamad, I.I., Quin, C.H., Selvakumaran, S. Preparation and evaluation of water-in-soybean oil–in-water emulsions by repeated premix membrane emulsification method using cellulose acetate membrane, 2016, Journal of Food Science and Technology, 53.
Zahan, K.A., Pa’e, N., Muhamad, I.I. An evaluation of fermentation period and discs rotation speed of rotary discs reactor for bacterial cellulose production, 2016, Sains Malaysiana, 45.
Mohd Daud, N.S., Abang Zaidel, D.N., Kok Song, L., Muhamad, I.I., Mohd Jusoh, Y.M.Antioxidant properties of rice bran oil from different varieties extracted by solvent extraction methods, 2016, Jurnal Teknologi, 78.
Mutia, R., Abang Zaidel, D.N., Muhamad, I.I. Optimization of cocoa butter equivalent production from formulated hard palm oil mid-fraction and canola oil blends, 2016, Jurnal Teknologi, 78.
Razak, S.I.A., Dahli, F.N., Wahab, I.F., Kadir, M.R.A., Muhamad, I.I., Yusof, A.H.M., Adeli, H.A conductive polylactic acid/polyaniline porous scaffold via freeze extraction for potential biomedical applications, 2016, Soft Materials, 14.
Vellayappan, M.V., Jaganathan, S.K., Muhamad, I.I. Unravelling the potential of nitric acid as a surface modifier for improving the hemocompatibility of metallocene polyethylene for blood contacting devices, 2016, PeerJ, 2016.
Selvakumaran, S., Muhamad, I.I., Abd Razak, S.I. Evaluation of kappa carrageenan as potential carrier for floating drug delivery system: Effect of pore forming agents, 2016, Carbohydrate Polymers, 135.
Selvakumaran, S., Muhamad, I.I. Evaluation of kappa carrageenan as potential carrier for floating drug delivery system: Effect of cross linker, 2015, International Journal of Pharmaceutics, 496.
Muhamad, I.I., Selvakumaran, S., Salehudin, M.H., Razak, S.I.A. Eco-friendly polymer-based nanocomposites for pharmaceutical applications, 2015, Handbook of Polymers for Pharmaceutical Technologies, 4.
Abbaszadeh, S., Alwi, S.R.W., Ghasemi, N., Nodeh, H.R., Webb, C., Muhamad, I.I. Use of pristine papaya peel to remove Pb(II) from aqueous solution, 2015, Chemical Engineering Transactions, 45.
Balaji, A., Jaganathan, S.K., Supriyanto, E., Muhamad, I.I., Khudzari, A.Z.M. Microwave-assisted fibrous decoration of mPE surface utilizing Aloe vera extract for tissue engineering applications, 2015, International Journal of Nanomedicine, 10.
Zahan, K.A., Pa’e, N., Muhamad, I.I. Monitoring the effect of pH on bacterial cellulose production and Acetobacter xylinum 0416 growth in a rotary discs reactor, 2015, Arabian Journal for Science and Engineering, 40.
Shaharuddin, S., Muhamad, I.I. Microencapsulation of alginate-immobilized bagasse with Lactobacillus rhamnosus NRRL 442: Enhancement of survivability and themotolerance, 2015, Carbohydrate Polymers, 119.
Mohd Nawi, N., Muhamad, I.I., Mohd Marsin, A. The physicochemical properties of microwave-assisted encapsulated anthocyanins from Ipomoea batatas as affected by different wall materials, 2015, Food Science and Nutrition, 3.
Siddique, B.M., Muhamad, I.I., Ahmad, A., Ayob, A., Ibrahim, M.H., AK, M.O. Effect of frying on the rheological and chemical properties of palm oil and its blends, 2015, Journal of Food Science and Technology, 52.
Muhamad, I.I., Salleh, E., Khairudin, N., Salehudin, M.H., Abdul Karim, N. Active and smart packaging film for food and postharvest treatment, 2015, Postharvest Biology and Technology of Horticultural Crops: Principles and Practices for Quality Maintenance.
Muhamad, I.I., Abdul Karim, N. Trends, convenience, and safety issues of ready meals, 2015, Food Engineering Series.
Razak, S.I.A., Sharif, N.F.A., Nayan, N.H.M., Muhamad, I.I., Yahya, M.Y. Impregnation of poly(lactic acid) on biologically pulped pineapple leaf fiber for packaging materials, 2015, BioResources, 10.
Nambiar, R.B., Selvam, S.P., Muhamad, I.I. Assessment of genetic diversity in salacia chinensis using RAPD analysis, 2015, Asian Journal of Microbiology, Biotechnology and Environmental Sciences, 17.
Anand Babu, P., Uma, S., Periyar selvam, S., Muhamad, I.I. Antioxidant activity of methanolic seed extract of Hydrophila Schulli, 2015, Asian Journal of Microbiology, Biotechnology and Environmental Sciences, 17.
Ishak, I., Muhamad, I.I., Marsin, A.M., Iqbal, T. Development of purple sweet potato starch base biodegradable film, 2015, Jurnal Teknologi, 77. Yahya, N.Y., Ngadi, N., Muhamad, I.I., Alias, H. Application of cellulose from pandan leaves as grafted flocculant for dyes treatment, 2015, Journal of Engineering Science and Technology, 10.
Zaidel, D.N.A., Zainudin, N.N., Jusoh, Y.M.M., Muhamad, I.I. Extraction and characterisation of pectin from sweet potato (Ipomoea batatas) pulp, 2015, Journal of Engineering Science and Technology, 10.
Abang Zaidel, D.N., Makhtar, N.A., Mohd Jusoh, Y.M., Muhamad, I.I. Efficiency and thermal stability of encapsulated anthocyanins from red dragon fruit (Hylocereus polyrhizus (Weber) Britton & Rose) using microwave-assisted technique, 2015, Chemical Engineering Transactions, 43.
Sulaiman, N., Idayu, M.I., Ramlan, A.Z., Fashya, M.N., Farahiyah, A.N.N., Mailina, J., Azah, M.A.N. Effects of extraction methods on yield and chemical compounds of gaharu (Aquilaria malaccensis), 2015, Journal of Tropical Forest Science, 27.
Rosdi, M.N.M., Sirat, H.M., Abdullah, S.A., Jamil, S., Muhamad, I.I., Zulkifli, R.M. Inhibitory effect of Artocarpus lowii King compounds on COX-2 and 15-LO activities, 2015, Jurnal Teknologi, 76.
Al Ghabid, A.H., Atikah, N., Sutopo, W., Nizam, M., Muhamad, I.I. Commercialization strategy formulation for university spin-off: A case study, 2015, Lecture Notes in Engineering and Computer Science, 2.
Nadri, M.H., Naser, M.A., Zukifli, R.M., Muhamad, I.I., Ahmad, F., Salleh, W.M.N.H.W., Sirat, H.M. Antioxidant activity of piper caninum and cyclooxygenase-2 inhibition by methoxylated flavones, 2015, African Journal of Traditional, Complementary and Alternative Medicines, 12.
Muhamad, I.I., Salehudin, M.H., Salleh, E. Cellulose nanofiber for eco-friendly polymer nanocomposites, 2015, Advanced Structured Materials, 75.
Razak, S.I.A., Muhamad, I.I., Sharif, N.F.A., Nayan, N.H.M., Rahmat, A.R., Yahya, M.Y. Mechanical and electrical properties of electrically conductive nanocomposites of epoxy/ polyaniline-Coated halloysite nanotubes, 2015, Digest Journal of Nanomaterials and Biostructures, 10.
Abbas Ali, M., Bamalli Nouruddeen, Z., Idayu Muhamad, I., Abd Latip, R., Hidayu Othman, N.Effect of palm olein addition on the quality characteristics of sunflower oil during deep fat frying, 2014, Acta Alimentaria, 43.
Abd Razak, S.I., Ahmad Sharif, N.F., Mat Nayan, N.H., Muhamad, I.I. In situ deposition of conducting polymer onto pineapple leaf fiber, 2014, Advanced Materials Research, 1043.
Shaharuddin, S., Abd Razak, S.I., Muhamad, I.I. Sugarcane bagasse as the potential agro-waste resource for the immobilization of lactobacillus rhamnosus NRRL 442, 2014, Advanced Materials Research, 1043.
Salehudin, M.H., Salleh, E., Muhamad, I.I., Mamat, S.N.H. Starch-based biofilm reinforced with empty fruit bunch cellulose nanofibre, 2014, Materials Research Innovations, 18
Razak, S.I.A., Sharif, N.F.A., Muhamad, I.I. Polyaniline-coated halloysite nanotubes: Effect of para-hydroxybenzene sulfonic acid doping, 2014, Composite Interfaces, 21.
Ali, M.A., Nouruddeen, Z.B., Muhamad, I.I., Latip, R.A., Othman, N.H. Effect of microwave heating on oxidative degradation of sunflower oil in the presence of palm olein, 2014, Sains Malaysiana, 43.
Saarani, N.N., Jamuna-Thevi, K., Muhammad, I.I., Hermawan, H. Antibacterial properties of guided bone regeneration membrane for periodontal applications, 2014, Applied Mechanics and Materials, 606.
Selvakumaran, S., Muhamad, I.I. Optimization of formulation of floating hydrogels containing gas forming agent using response surface methodology, 2014, International Journal of Pharmacy and Pharmaceutical Sciences, 6.
Mojaveryazdi, F.S., Muhamad, I.I., Rezania, S., Benham, H. Importance of glucose and pseudomonas in producing degradable plastics, 2014, Jurnal Teknologi (Sciences and Engineering), 69.
Sahat, N.S., Zaidel, D.N.A., Muhamad, I.I., Alam, M.N.H.Z. Stability study of water-in-oil emulsion containing anthocyanins from red cabbage, 2014, Jurnal Teknologi (Sciences and Engineering), 69.
Maarasyid, C., Muhamad, I.I., Supriyanto, E. Potential source and extraction of vitamin E from palm-based oils: A review, 2014, Jurnal Teknologi (Sciences and Engineering), 69.
Mazlan, H.S., Muhamad, I.I., Hassan, N.D., Tan, N.A.H. Optimization of protein extraction from fermented and non fermented perah seed by using response surface methodology, 2014, Jurnal Teknologi (Sciences and Engineering), 68.
Pa’E, N., Hamid, N.I.A., Khairuddin, N., Zahan, K.A., Seng, K.F., Siddique, B.M., Muhamad, I.I.Effect of different drying methods on the morphology, crystallinity, swelling ability and tensile properties of nata de coco, 2014, Sains Malaysiana, 43.
Farizhandi, A.A.K., Rahman, S.A.S.A., Zaidel, D.N.A., Muhamad, I.I., Majid, F.A.A. Plant protein hydrolysates from soybean and rice grain as a supplement for medium in human skin fibroblast 1184 cell culture, 2014, Advances in Environmental Biology, 8.
Tan, N.A.H., Mobin Siddique, B., Muhamad, I.I., Seng Kok, F. The effect of solvents on the Soxhlet extraction of omega 3 from perah oil, 2014, Jurnal Teknologi (Sciences and Engineering), 67.
Yahya, N.Y., Ngadi, N., Muhamad, I.I. Extraction and characterization of cellulose from pandan leaves (Pandanusamaryllifolius Roxb.), 2014, Research Journal of Chemistry and Environment, 18.
Zahan, K.A., Pa’e, N., Muhamad, I.I. Process parameters for fermentation in a rotary disc reactor for optimum microbial cellulose production using response surface methodology, 2014, BioResources, 9.
Hassan, N.D., Muhammad, I.I., Sarmidi, M.R. The effect of co-pigmentation on the stability of butterfly pea anthocyanins, 2014, Key Engineering Materials, 594-595.
Zahan, K.A., Pa’E, N., Seng, K.F., Muhamad, I.I. Monitoring initial glucose concentration for optimum pH control during fermentation of microbial cellulose in rotary discs reactor, 2014, Key Engineering Materials, 594-595.
Khairuddin, N., Muhamad, I.I., Thongbua, K., Shaharuddin, S., Mohamad, S.N.H.Newly developed starch-based hydroxyethyl cellulose film with wide spectrum of pH-colour indicator, 2014, Key Engineering Materials, 594-595.
Shaharuddin, S., Muhamad, I.I., Seng, K.F., Zahan, K.A., Khairuddin, N. Potential use of biofibers for functional immobilization of lactobacillus rhamnosus NRRL 442, 2014, Key Engineering Materials, 594-595.
Abbas Ali, M., Nouruddeen, Z.B., Muhamad, I.I., Latip, R.A., Othman, N.H., Mahmood, N.A.N. Impact of palm olein addition on the thermo-oxidative degradation of canola oil during frying, 2013, Chiang Mai Journal of Science, 40.
Taib, M.R., Muhamad, I.I., Ngo, C.L., Ng, P.S. Drying kinetics, rehydration characteristics and sensory evaluation of microwave vacuum and convective hot air dehydrated jackfruit bulbs, 2013, Jurnal Teknologi (Sciences and Engineering), 65.
Jun, T.Y., Muhamad, I.I., Shaharuddin, S. Alternative source of beta-glucan from oil palm (Elaeis guineensis) trunk fiber, 2013, Jurnal Teknologi (Sciences and Engineering), 64.
Husin, N., Hadi Tan, N.A., Idayu Muhamad, I., Mohd Nawi, N. Physicochemical and biochemical characteristics of the underutilized Elateriospermum tapos, 2013, Jurnal Teknologi (Sciences and Engineering), 64.
Leng, T.W., Idayu Muhamad, I., Abang Zaidel, D.N., Khairuddin, N. Evaluation of capsaicinoids extracts as bioactive substance for antimicrobial films, 2013, Jurnal Teknologi (Sciences and Engineering), 64.
Lee, N.Y., Setapar, S., Sharif, N., Ahmad, A., Khatoon, A., Azizi, C.M., Ida-Idayu, M. Extraction of rubber (hevea brasiliensis) seed oil using supercritical carbon dioxide and soxhlet extraction, 2013, Research Journal of Chemistry and Environment, 17.
Pa’e, N., Zahan, K.A., Muhamad, I.I., Seng, K.F. Modified fermentation for production of bacterial cellulose/polyaniline as conductive biopolymer material, 2013, Jurnal Teknologi (Sciences and Engineering), 62.
Ali, M.A., Nouruddeen, Z.B., Muhamad, I.I., Latip, R.A., Othman, N.H. Effect of microwave heating on the quality characteristics of canola oil in presence of palm olein, 2013, Acta Scientiarum Polonorum, Technologia Alimentaria, 12.
Hezaveh, H., Muhamad, I.I. Effect of MgO nanofillers on burst release reduction from hydrogel nanocomposites, 2013, Journal of Materials Science: Materials in Medicine, 24.
Mohd-Setapar, S.H., Yian, L.N., Yunus, M.A.C., Muhamad, I.-I., Zaini, M.A.A. Extraction of rubber (hevea brasiliensis) seeds oil using supercritical carbon dioxide, 2013, Journal of Biobased Materials and Bioenergy, 7.
Hezaveh, H., Muhamad, I.I. Controlled drug release via minimization of burst release in pH-response kappa-carrageenan/polyvinyl alcohol hydrogels, 2013, Chemical Engineering Research and Design, 91.
Hezaveh, H., Muhamad, I.I. Modification and swelling kinetic study of kappa-carrageenan-based hydrogel for controlled release study, 2013, Journal of the Taiwan Institute of Chemical Engineers, 44.
Hezaveh, H., Muhamad, I.I. Effect of natural cross-linker on swelling and structural stability of kappa-carrageenan/hydroxyethyl cellulose pH-sensitive hydrogels, 2012, Korean Journal of Chemical Engineering, 29.
Idham, Z., Muhamad, I.I., Sarmidi, M.R. Degradation kinetics and color stability of spray-dried encapsulated anthocyanins from Hibiscus sabdariffa L., 2012, Journal of Food Process Engineering, 35.
Hezaveh, H., Muhamad, I.I. The effect of nanoparticles on gastrointestinal release from modified κ-carrageenan nanocomposite hydrogels, 2012, Carbohydrate Polymers, 89.
Hezaveh, H., Muhamad, I.I. Impact of metal oxide nanoparticles on oral release properties of pH-sensitive hydrogel nanocomposites, 2012, International Journal of Biological Macromolecules, 50.
Hezaveh, H., Muhamad, I.I., Noshadi, I., Shu Fen, L., Ngadi, N. Swelling behaviour and controlled drug release from cross-linked -carrageenan/NaCMC hydrogel by diffusion mechanism, 2012, Journal of Microencapsulation, 29.
Idham, Z., Muhamad, I.I., Mohd Setapar, S.H., Sarmidi, M.R. Effect of thermal processes on roselle anthocyanins encapsulated in different polymer matrices, 2012, Journal of Food Processing and Preservation, 36.
Mohamad, S.N.H., Pa’e, N., Yusof, A.H.M., Muhamad, I.I. Characterizations of newly developed bacterial cellulose-chitosan membrane with pyrroline, 2012, Sustainable Membrane Technology for Energy, Water, and Environment.
Ali, M.A., Sayeed, M.A., Alam, M.S., Yeasmin, M.S., Khan, A.M., Muhamad, I.I.Characteristics of oils and nutrient contents of Nigella sativa Linn. and Trigonella foenum-graecum seeds, 2012, Bulletin of the Chemical Society of Ethiopia, 26.
Ali, M.A., Sayeed, M.A., Islam, M.S., Yeasmin, M.S., Khan, G.R.M.A.M., Muhamad, I.I. Physicochemical and antimicrobial properties of Trichosanthes anguina and Swietenia mahagoni seeds, 2011, Bulletin of the Chemical Society of Ethiopia, 25.
Ibrahim, U.K., Muhammad, I.I., Salleh, R.M. The effect of pH on color behavior of Brassica oleracea anthocyanin, 2011, Journal of Applied Sciences, 11.
Muhamad, I.I., Fen, L.S., Hui, N.H., Mustapha, N.A. Genipin-cross-linked kappa-carrageenan/carboxymethyl cellulose beads and effects on beta-carotene release, 2011, Carbohydrate Polymers, 83.
Muhamad, I.I., Khairuddin, N., Ling, L.H. Effect of lauric acid addition on the microbial efficacy of chitosan-based film, 2011, Jurnal Teknologi, 54.
Muhamad, I.I.Bt., Soltani, M.A., Enayati, A., Aliakbarian, H., Ameri, H., Moghawemi, M. Application of electromagnetic waves as a solution to some agricultural problems, 2010, Egyptian Journal of Biological Pest Control, 20.
Salleh, E., Muhamad, I.I. Starch-based antimicrobial films incorporated with lauric acid and chitosan, 2010, AIP Conference Proceedings, 1217.
Campbell, G.M., Fang, C., Muhamad, I.I. On predicting roller milling performance VI: Effect of kernel hardness and shape on the particle size distribution from First Break milling of wheat, 2007, Food and Bioproducts Processing, 85.
Muhamad, I.I., Campbell, G.M. Effects of kernel hardness and moisture content on wheat breakage in the single kernel characterisation system, 2004, Innovative Food Science and Emerging Technologies, 5.

Eko Supriyanto

Fiedler P., Fonseca C., Supriyanto E., Zanow F., Haueisen J. A high-density 256-channel cap for dry electroencephalography, 2022, Human Brain Mapping, 43.
Asadi S., Nilashi M., Abumalloh R.A., Samad S., Ahani A., Ghabban F., Yusuf S.Y.M., Supriyanto E. Evaluation of factors to respond to the COVID-19 pandemic using DEMATEL and fuzzy rule-based techniques, 2022, International Journal of Fuzzy Systems, 24.
Mani M.P., Sadia M., Jaganathan S.K., Khudzari A.Z., Supriyanto E., Saidin S., Ramakrishna S., Ismail A.F., Faudzi A.A.M. A review on 3D printing in tissue engineering applications, 2022, Journal of Polymer Engineering, 42.
Prinke P., Haueisen J., Klee S., Rizqie M.Q., Supriyanto E., Konig K., Breunig H.G., Piatek L. Automatic segmentation of skin cells in multiphoton data using multi-stage merging, 2021, Scientific Reports, 11.
Supriyanto E., Mustika. The improvement of critical thinking skills through problem based learning models assisted by trackers video on parabolic movements, 2021, Journal of Physics: Conference Series, 2019.
Taheri, S., Asadi, S., Nilashi, M., Ali Abumalloh, R., Ghabban, N.M.A., Mohd Yusuf, S.Y., Supriyanto, E., Samad, S. A literature review on beneficial role of vitamins and trace elements: Evidence from published clinical studies, 2021, Journal of Trace Elements in Medicine and Biology, 67.
Mubarak, Z., Supriyanto, E. SFRA test method application for turbo generator rotor winding, 2021, Journal of Physics: Conference Series, 1887.
Yadegaridehkordi, E., Nilashi, M., Nizam Bin Md Nasir, M.H., Momtazi, S., Samad, S., Supriyanto, E., Ghabban, F. Customers segmentation in eco-friendly hotels using multi-criteria and machine learning techniques, 2021, Technology in Society, 65.
Nilashi, M., Asadi, S., Abumalloh, R.A., Samad, S., Ghabban, F., Supriyanto, E., Osman, R. Sustainability performance assessment using self-organizing maps (SOM) and classification and ensembles of regression trees (CART), 2021, Sustainability (Switzerland), 13.
Prasetyo, A., Supriyanto, E. Failure analysis of power transformer based on transformer turn ratio test and SFRA, 2021, Journal of Physics: Conference Series, 1817.
Mulyadi, I.H., Fiedler, P., Eichardt, R., Haueisen, J., Supriyanto, E. Pareto optimization for electrodes placement: Compromises between electrophysiological and practical aspects, 2021, Medical and Biological Engineering and Computing, 59.
Asadi, S., Nilashi, M., Abumalloh, R.A., Samad, S., Ahani, A., Ghabban, F., Yusuf, S.Y.M., Supriyanto, E. Evaluation of factors to respond to the COVID-19 pandemic using DEMATEL and fuzzy rule-based techniques, 2021, International Journal of Fuzzy Systems.
Musafer, K.N.J., Huyop, F.Z., Ewadh, M.J., Supriyanto, E., Al-Thuwaini, T.M., Al-Shuhaib, M.B.S. The single nucleotide polymorphisms rs11761556 and rs12706832 of the leptin gene are associated with type 2 diabetes mellitus in the Iraqi population, 2021, Archives of Biological Sciences, 73.
Burhani, A., Rozaq, F., Supriyanto, E. Case study application of cold peening in combination with thermal stress relieving as effective method for straightening large turbine rotor, 2020, ICPECTS 2020 – IEEE 2nd International Conference on Power, Energy, Control and Transmission Systems.
Nurjana, I.K., Fajar, Y.T., Alfarisi, M., Supriyanto, E. The effect of charged air pressure for engine efficiency management, 2020, ICPECTS 2020 – IEEE 2nd International Conference on Power, Energy, Control and Transmission Systems.
Nugroho, A., Nurbanasari, M., Suwarno, Supriyanto, E. Case study: Remaining life analysis of creep strength enhanced ferritic steel T91 after 20 years operation on 600 MW coal-fired power plant, 2020, ICPECTS 2020 – IEEE 2nd International Conference on Power, Energy, Control and Transmission Systems.
Hamed, F., Supriyanto, E., Osman, S., Ali, T.A.E.K. Risk Prediction of major depressive disorder using artificial neural network, 2020, 2020 3rd International Seminar on Research of Information Technology and Intelligent Systems (ISRITI 2020).
Annisa, F.Q., Supriyanto, E., Taheri, S. Personality dimensions classification with EEG analysis using support vector machine, 2020, 2020 3rd International Seminar on Research of Information Technology and Intelligent Systems (ISRITI 2020).
Dölker, E.-M., Mubin, A.B., Supriyanto, E., Haase, E., Krzywinski, S., Haueisen, J. Sensation thresholds in electrocutaneous stimulation, 2020, Current Directions in Biomedical Engineering, 6.
Musafer, K.N.J., Huyop, F.Z., Ewadh, M.J., Supriyanto, E., Rava, M. A systematic mapping study on the risk factors leading to type II diabetes mellitus, 2020, Karbala International Journal of Modern Science, 6.
Warsito, I.F., Yasir, M.F.M., Abu Taib, M.A., Supriyanto, E., Reihannisha, I., Bin Kasri, N.F. Double air terminal in lightning protection system, 2019, 2019 International Conference on Technologies and Policies in Electric Power and Energy (TPEPE 2019).
Bin Kasri, N.F., Yasir, M.F.M., Abu Taib, M.A., Supriyanto, E., Warsito, I.F., Reihannisha, I. Effectiveness of tip designs in reducing fire risk at cold vent stack, 2019, 2019 International Conference on Technologies and Policies in Electric Power and Energy (TPEPE 2019).
Hussien, H.I., Akmal Ayob, M., Warsito, I.F., Supriyanto, E., Reihannisha, I. Electromagnetic risk identification in oil and gas industry, 2019, 2019 International Conference on Technologies and Policies in Electric Power and Energy (TPEPE 2019).
Mani, M.P., Jaganathan, S.K., Supriyanto, E. Enriched mechanical strength and bone mineralisation of electrospun biomimetic scaffold laden with ylang ylang oil and zinc nitrate for bone tissue engineering, 2019, Polymers, 11.
Jaganathan, S.K., Mani, M.P., Prabhakaran, P., Supriyanto, E., Ismail, A.F. Production, blood compatibility and cytotoxicity evaluation of a single stage non-woven multicomponent electrospun scaffold mixed with sesame oil, honey and propolis for skin tissue engineering, 2019, International Journal of Polymer Analysis and Characterization, 24.
Kaka Bra, K.H., Supriyanto, E. A smart nutrition management system and nutrition related diseases in humans, 2019, Indian Journal of Public Health Research and Development, 10.
Warid, M.N.M., Supriyanto, E., Yahya, A., Bah, M.N.M., Fang, N.C. Online framework for thalassemia medical record management system, 2019, AIP Conference Proceedings, 2092.
Wijaya, H.R., Supriyanto, E., Salim, M.I.M., Siregar, K.N., Eryando, T. Stroke management cost: Review in Indonesia, Malaysia and Singapore, 2019, AIP Conference Proceedings, 2092.
Siregar, K.N., Wijaya, H.R., Supriyanto, E., Salim, M.I.M., Eryando, T., Syuhada, W.N. Online dynamic risk calculator for early detection of stroke, 2019, AIP Conference Proceedings, 2092.
Mulyadi, I.H., Nelmiawati, Supriyanto, E. Improving accuracy of derived 12-lead electrocardiography by waveform segmentation, 2019, Indonesian Journal of Electrical Engineering and Informatics, 7.
Ismail, I., Narayanan, L.T., Hasan, R.A., Supriyanto, E. Automated 6-minute walk test distance measurement and walk characterisation using a novel infrared sensor-based technique, 2019, Sains Malaysiana, 48.
Jaganathan, S.K., Mani, M.P., Supriyanto, E.K.O. Blood compatibility assessments of electrospun polyurethane nanocomposites blended with megni oil for tissue engineering applications, 2019, Anais da Academia Brasileira de Ciencias, 91.
Khattak, M.T., Supriyanto, E., Aman, M.N., Al-Ashwal, R.H. Predicting down syndrome and neural tube defects using basic risk factors, 2019, Medical and Biological Engineering and Computing.
Mulyadi, I.H., Nelmiawati, Supriyanto, E. Segment-specific easy coefficients for improving accuracy of derived 12-lead electrocardiography, 2018, Proceedings of the 2018 International Conference on Applied Engineering (ICAE 2018).
Binti Omar, N., Supriyanto, E., Al-Ashwal, R.H., Binti Abdul Wahab, A. Personalized clinical pathway for heart failure management, 2018, Proceedings of the 2018 International Conference on Applied Engineering (ICAE 2018).
Hashim, N.H., Supriyanto, E., Mohd Warid, M.N., Md Khudzari, A.Z. computer guided hospital accreditation management system, 2018, Proceedings of the 2018 International Conference on Applied Engineering (ICAE 2018).
Ayob, M.A., Madrin, F.P., Hussien, H.I., Abu Taib, M.A., Yasir, M.F.M., Sayahkarajy, M., Supriyanto, E. Optimal power and signal cables arrangement for minimizing electromagnetic interference in oil and gas industry, 2018, 2018 22nd International Conference Electronics.
Madrin, F.P., Ayob, M.A., Sayahkarajy, M., Hussien, H.I., Taib, M.A.A., Yasir, M.F.M., Supriyanto, E. Optimal bonding arrangement for protection of communication signals in the oil and gas industry, 2018, 2018 International Conference on Information and Communications Technology (ICOIACT 2018).
Sayahkarajy, M., Supriyanto, E., Satria, M.H., Samion, H. Design of a microcontroller-based artificial pacemaker: An internal pacing device, 2018, Proceeding of 2017 International Conference on Robotics, Automation and Sciences (ICORAS 2017).
Afifi, W.N.W.M., Warsito, I.F., Sayahkarajy, M., Supriyanto, E. The development of an online pneumonia risk prediction system, 2018, Proceeding of 2017 International Conference on Robotics, Automation and Sciences, (ICORAS 2017).
Rosslan, A.S.B., Soetarman, A.S.B., Ridzuan, N.B., Ibrahim, Z., Supriyanto, E. User acceptance analysis of patient data management software, 2018, Proceeding of 2017 International Conference on Robotics, Automation and Sciences, (ICORAS 2017).
Sayahkarajy, M., Supriyanto, E., Mohamed, Z. Principal vibration modes of a rigid-flexible manipulator, 2018, Proceeding of 2017 International Conference on Robotics, Automation and Sciences, (ICORAS 2017).
Sayahkarajy, M., Supriyanto, E. Design of a temporay external artificial pacemaker simulator, 2018, Proceeding of 2017 International Conference on Robotics, Automation and Sciences, (ICORAS 2017).
Nazirun, N.N.N., Shakhih, M.F.M., Ren, P.C., Zaini, M.A.A., Nordin, N., Empaling, S., Amran, D.I., Supriyanto, E. User acceptance analysis of hospital asset management system, 2018, Proceeding of 2017 International Conference on Robotics, Automation and Sciences, (ICORAS 2017).
Herrmann, I., Supriyanto, E., Jaganathan, S.K., Manikandan, A. Advanced nanofibrous textile-based dressing material for treating chronic wounds, 2018, Bulletin of Materials Science, 41.
Ayob, M.A., Madrin, F.P., Hussien, H.I., Abu Taib, M.A., Yasir, M.F.M., Supriyanto, E. Optimal cables arrangement for minimizing electromagnetic interference in hospital, 2018, Procedia Computer Science, 133.
John, A.A., Jaganathan, S.K., Ayyar, M., Krishnasamy, N.P., Rajasekar, R., Supriyanto, E. Folic acid decorated chitosan nanoparticles and its derivatives for the delivery of drugs and genes to cancer cells, 2017, Current Science, 113.
Lam, J., Supriyanto, E., Yahya, F., Satria, M.H., Kadiman, S., Azan, A., Soesanto, A. Online Adaptive coronary heart disease risk prediction model, 2017, MATEC Web of Conferences, 125.
Pahl, C., Ebelt, H., Sayahkaraji, M., Supriyanto, E., Soesanto, A. Towards robot-assisted echocardiographic monitoring in catheterization laboratories: Usability-centered manipulator for transesophageal echocardiography, 2017, Journal of Medical Systems, 41.
Jaganathan, S.K., Mani, M.P., Ayyar, M., Supriyanto, E. Engineered electrospun polyurethane and castor oil nanocomposite scaffolds for cardiovascular applications, 2017, Journal of Materials Science, 52.
Mahmud, W.M.H.W., Supriyanto, E. An approach towards ultrasound kidney cysts detection using vector graphic image analysis, 2017, IOP Conference Series: Materials Science and Engineering, 226.
Kaiser, E., Jaganathan, S.K., Supriyanto, E., Ayyar, M. Fabrication and characterization of chitosan nanoparticles and collagen-loaded polyurethane nanocomposite membrane coated with heparin for atrial septal defect (ASD) closure, 2017, 3 Biotech, 7.
Subramanian, A.P., John, A.A., Vellayappan, M.V., Balaji, A., Jaganathan, S.K., Manikandan, A., Supriyanto, E. An insight into the putative role of victuals like honey and its polyphenols in breast cancer, 2017, Current Science, 112.
Nazirun, N.N.N., Supriyanto, E., Baumgarten, D., Haueisen, J., Pohl, C., Omar, A.F. The correlation of features in detecting cardiovascular vulnerable plaque, 2017, Proceedings of 2016 International Conference on Robotics, Automation and Sciences (ICORAS 2016).
Löschel, J., Haueisen, J., Supriyanto, E., Jaganathan, S.K., Soesanto, A.M., Aschoff, M. Validation study on cardiac output and index determination in impendence cardiography on postoperative cardiac patients in critical care, 2017, Proceedings of 2016 International Conference on Robotics, Automation and Sciences (ICORAS 2016).
Yahya, M.F., Supriyanto, E. Physiological modeling of sound effect on neuro-cardiovascular system, 2017, Proceedings of 2016 International Conference on Robotics, Automation and Sciences (ICORAS 2016).
Soh, S.S., Tan, T.S., Alang, T.A.I.T., Supriyanto, E. White matter hyperintensity segmentation on T2 FLAIR brain images using supervised segmentation method, 2017, Proceedings of 2016 International Conference on Robotics, Automation and Sciences (ICORAS 2016).
Yusof, N.S.M., Supriyanto, E., Dewi, D.E.O. Investigation of electrochemical characterization of agarose gel for model of human head correlated to lightning currents, 2017, Proceedings of 2016 International Conference on Robotics, Automation and Sciences (ICORAS 2016).
Mulyadi, I.H., Haueisen, J., Supriyanto, E. Practical aspects in surface biopotential electrode placement for smart clothing: A simulation study, 2017, AIP Conference Proceedings, 1817.
Jaganathan, S.K., Balaji, A., Mohandas, H., Sivakumar, G., Kasi, P., Selvakumar, M., Kadiman, S.B., Srinivasan, A., Mohd Faudzi, A.A.B., Supriyanto, E., Mandal, M. Hemocompatibility of sulfuric acid-treated metallocene polyethylene and its application in reducing the quantity of medical plastic waste, 2017, Polymer – Plastics Technology and Engineering, 56.
Warsito, I.F., Pahl, C., Supriyanto, E., Soesanto, A. Risk analysis of transesophageal echocardiography telemanipulator in catheterization laboratory, 2017, International Journal of Biology and Biomedical Engineering, 11.
Soh, J.Z.E., Supriyanto, E. Mixing in micro-scaled coiled flow inverter of varying tube diameter, 2017, International Journal of Mechanics, 11.
Sayahkarajy, M., Supriyanto, E., Mohamed, Z. Reduced order modeling of two-link flexible manipulators using finite element modal decomposition, 2017, International Journal of Mechanics, 11.
John, A.A., Jaganathan, S.K., Ayyar, M., Krishnasamy, N.P., Rajasekar, R., Supriyanto, E. Folic acid decorated chitosan nanoparticles and its derivatives for the delivery of drugs and genes to cancer cells, 2017, Current Science, 113.
Soh, J.Z.E., Supriyanto, E. An investigation of mixing in micro coiled flow inverter in varying tube diameter with fixed reynolds number, 2017, WSEAS Transactions on Fluid Mechanics, 12.
Bahari, S.S., Heryansyah, A., Muhamad, I.I.B., Supriyanto, E. Effect of palm waste on sloping land to fresh fruit bunch production in oil palm plantation, 2017, Walailak Journal of Science and Technology, 14.
Yew, H.T., Supriyanto, E., Satria, M.H., Hau, Y.W. New vertical handover method to optimize utilization of wireless local area network in high-speed environment, 2016, PLoS ONE, 11.
Al-Ashwal, R.H., Supriyanto, E. Exploratory study for myocardial infarction clinical pathway compliance and performance, 2016, Indian Journal of Science and Technology, 9.
Al-Ashwal, R.H., Supriyanto, E. Evidence for the contemporary clinical pathway quality measures: Literature review, 2016, Indian Journal of Science and Technology, 9.
Subramanian, A.P., John, A.A., Vellayappan, M.V., Balaji, A., Jaganathan, S.K., Mandal, M., Supriyanto, E. Honey and its phytochemicals: Plausible agents in combating colon cancer through its diversified actions, 2016, Journal of Food Biochemistry, 40.
Narayanan, A.L.T., Ayob, M.A., Nordin, N., Harris, A.R.A., Supriyanto, E. Development of a novel device for monitoring incentive spirometry performance, 2016, Sains Malaysiana, 45.
Marvibaigi, M., Amini, N., Supriyanto, E., Majid, F.A.A., Jaganathan, S.K., Jamil, S., Almaki, J.H., Nasiri, R. Antioxidant activity and ROS-dependent apoptotic effect of scurrula ferruginea (jack) danser methanol extract in human breast cancer cell MDA-MB-231, 2016, PLoS ONE, 11.
Surakusumah, R.F., Rizqie, M.Q., Hidayat, D.H.P., Supriyanto, E., Satria, M.H. A novel design of needle aspiration biopsy monitoring instrument (NAOMI) tested on a low cost chest phantom, 2016, MATEC Web of Conferences, 59.
John, A.A., Jaganathan, S.K., Supriyanto, E., Khudzari, A.Z.M., Muhamad, I.I. Novel green surface modification of metallocene polyethylene by steam to enhance its hemocompatible properties, 2016, Journal of Applied Polymer Science, 133.
Subramanian, A.P., Jaganathan, S.K., Mandal, M., Supriyanto, E., Muhamad, I.I. Gallic acid induced apoptotic events in HCT-15 colon cancer cells, 2016, World Journal of Gastroenterology, 22.
Yew, H.T., Supriyanto, E., Satria, M.H., Hau, Y.W. Adaptive network selection mechanism for telecardiology system in developing countries, 2016, 3rd IEEE EMBS International Conference on Biomedical and Health Informatics (BHI 2016).
Sayahkarajy, M., Mohamed, Z., Faudzi, A.A.M., Supriyanto, E. Hybrid vibration and rest-to-rest control of a two-link flexible robotic arm using H∞ loop-shaping control design, 2016, Engineering Computations (Swansea, Wales), 33.
Nurullail, F.I.B., Pahl, C., Supriyanto, E. Image based transesophageal echocardiography probe tip localization, 2016, Proceedings – 2015 4th International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering (ICICI-BME 2015).
Pohl, F., Aditya, Y.N., Pohl, C., Supriyanto, E. Application of standing waves as audible information in hypertension therapy, 2016, Proceedings – 2015 4th International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering (ICICI-BME 2015).
Lam, J., Noor, Y.A., Supriyanto, E. Ontology driven knowledge base for high risk pregnancy management, 2016, Proceedings – 2015 4th International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering (ICICI-BME 2015).
Mohammad, N., Omar, Z., Supriyanto, E., Dietzel, A., Haueisen, J. Automated detection of microaneurysm for fundus images, 2016, IECBES 2016 – IEEE-EMBS Conference on Biomedical Engineering and Sciences.
Yusof, N.S.M., Dewi, D.E.O., Salih, N.M., Supriyanto, E., Syahrom, A., Faudzi, A.A.M.
Epoxy resin characterization for imaging phantom: X-ray, textural, and mechanical properties, 2016, IECBES 2016 – IEEE-EMBS Conference on Biomedical Engineering and Sciences.
John, A.A., Jaganathan, S.K., Supriyanto, E., Manikandan, A. Surface modification of titanium and its alloys for the enhancement of osseointegration in orthopaedics, 2016, Current Science, 111.
Al-Ashwal, R.H., Supriyanto, E., Andriantoro, H. Design standard in health care to follow or not? An insight from clinical pathway, 2016, Jurnal Teknologi, 78.
Lestari, F., Ismail, K., Hamid, A.B.A., Supriyanto, E., Sutupo, W. Simulation of refinery-supplier relationship, 2016, Lecture Notes in Engineering and Computer Science, 2.
Subramanian, A.P., Jaganathan, S.K., Manikandan, A., Pandiaraj, K.N., Gomathi, N., Supriyanto, E. Recent trends in nano-based drug delivery systems for efficient delivery of phytochemicals in chemotherapy, 2016, RSC Advances, 6.
Jaganathan, S.K., Subramanian, A.P., Vellayappan, M.V., Balaji, A., John, A.A., Jaganathan, A.K., Supriyanto, E. Natural frequency of cancer cells as a starting point in cancer treatment, 2016, Current Science, 110.
Amini, N., Majid, F.A.A., Marvibaigi, M., Supriyanto, E., Jaganathan, S.K., Tet Soon, W., Nasiri, R., Hamzehalipour, J. Cervicare™ induces apoptosis in HeLa and CaSki cells through ROS production and loss of mitochondrial membrane potential, 2016, RSC Advances, 6 .
Narayanan, A.L.T., Hamid, S.R.G.S., Supriyanto, E. Evidence regarding patient compliance with incentive spirometry interventions after cardiac, thoracic and abdominal surgeries: A systematic literature review, 2016, Canadian Journal of Respiratory Therapy, 52.
Klemm, M., Nagel, E., Dietzel, A., Lai, L.K.W., Supriyanto, E., Schweitzer, D. Agreement between eyes in wide-field fluorescence lifetime imaging ophthalmoscopy measurements at the human retina in healthy volunteers, 2016, IFMBE Proceedings, 56.
Balaji, A., Vellayappan, M.V., John, A.A., Subramanian, A.P., Jaganathan, S.K., Selvakumar, M., Mohd Faudzi, A.A.B., Supriyanto, E., Yusof, M. Biomaterials based nano-applications of Aloe vera and its perspective: a review, 2015, RSC Advances, 5.
Pahl, C., Mohammad, N.B., Supriyanto, E. Analysis on the electroretinography response for flickering and current stimulations, 2015, 2015 38th International Conference on Telecommunications and Signal Processing (TSP 2015).
Pahl, C., Supriyanto, E. Infrared based clinical landmark determination for ultrasound image acquisition, 2015, 2015 38th International Conference on Telecommunications and Signal Processing (TSP 2015).
Surakusumah, R.F., Faudzi, A.A.M., Dewi, D.E.O., Supriyanto, E. Development of a half sphere bending soft actuator for flexible bronchoscope movement, 2015, 2014 IEEE International Symposium on Robotics and Manufacturing Automation (IEEE-ROMA2014).
Faisal, A., Ng, S.-C., Goh, S.-L., George, J., Supriyanto, E., Lai, K.W. Multiple LREK active contours for knee meniscus ultrasound image segmentation, 2015, IEEE Transactions on Medical Imaging, 34.
Pahl, C., Oon, T.Y., Supriyanto, E. Fuzzy system based face tracking for head movement control in progressive health care, 2015, 2015 20th International Conference on Methods and Models in Automation and Robotics (MMAR 2015).
Pahl, C., Supriyanto, E. Design of automatic transabdominal ultrasound imaging system, 2015, 2015 20th International Conference on Methods and Models in Automation and Robotics (MMAR 2015).
Pahl, C., Supriyanto, E. Guide to fuzzy logic based transesophageal echocardiography motorized probe control, 2015, 2015 20th International Conference on Methods and Models in Automation and Robotics (MMAR 2015).
Balaji, A., Jaganathan, S.K., Supriyanto, E., Muhamad, I.I., Khudzari, A.Z.M. Microwave-assisted fibrous decoration of mPE surface utilizing Aloe vera extract for tissue engineering applications, 2015, International Journal of Nanomedicine, 10.
Fiedler, P., Pedrosa, P., Griebel, S., Fonseca, C., Vaz, F., Supriyanto, E., Zanow, F., Haueisen, J. Novel multipin electrode cap system for dry electroencephalography, 2015, Brain Topography, 28.
Vellayappan, M.V., Jaganathan, S.K., Supriyanto, E. Review: unraveling the less explored flocking technology for tissue engineering scaffolds, 2015, RSC Advances, 5.
Subramanian, A.P., Jaganathan, S.K., Supriyanto, E. Overview on in vitro and in vivo investigations of nanocomposite based cancer diagnosis and therapeutics, 2015, RSC Advances, 5.
Balaji, A., Jaganathan, S.K., Vellayappan, M.V., John, A.A., Subramanian, A.P., SelvaKumar, M., Mohandas, H., Sundar Raj, M., Supriyanto, E. Prospects of common biomolecules as coating substances for polymeric biomaterials, 2015, RSC Advances, 5.
Vellayappan, M.V., Balaji, A., Subramanian, A.P., John, A.A., Jaganathan, S.K., Murugesan, S., Mohandas, H., Supriyanto, E., Yusof, M. Tangible nanocomposites with diverse properties for heart valve application, 2015, Science and Technology of Advanced Materials, 16.
Baumgarten, D., Braune, F., Supriyanto, E., Haueisen, J. Plane-wise sensitivity based inhomogeneous excitation fields for magnetorelaxometry imaging of magnetic nanoparticles, 2015, Journal of Magnetism and Magnetic Materials, 380.
Vellayappan, M.V., Balaji, A., Subramanian, A.P., John, A.A., Jaganathan, S.K., Murugesan, S., Supriyanto, E., Yusof, M. Multifaceted prospects of nanocomposites for cardiovascular grafts and stents, 2015, International Journal of Nanomedicine, 10.
Jaganathan, S.K., Balaji, A., Vellayappan, M.V., Subramanian, A.P., John, A.A., Asokan, M.K., Supriyanto, E. Review: Radiation-induced surface modification of polymers for biomaterial application, 2015, Journal of Materials Science, 50.
Jaganathan, S.K., Subramanian, A.P., John, A.A., Vellayappan, M.V., Balaji, A., Supriyanto, E., Gundumalai, B., Jaganathan, A.K. Estimation and comparison of natural frequency of coronary metallic stents using modal analysis, 2015, Indian Journal of Science and Technology, 8.
Tung Yew, H., Supriyanto, E., Satria, M.H., Wen Hau, Y. Autonomous network selection strategy for telecardiology application in heterogeneous wireless networks, 2015, Jurnal Teknologi, 77.
Yew, H.T., Supriyanto, E., Haikal Satria, M., Hau, Y.W. User-centric based vertical handover decision algorithm for telecardiology application in heterogeneous networks, 2015, Jurnal Teknologi, 77.
Wan Mahmud, W.M.H., Izaham, R.M.A.R., Supriyanto, E. Boundary detection of kidney ultrasound image based on vector graphic approach, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
ahl, C., Supriyanto, E., Detschew, V. Evaluation of UML modeling tools for clinical pathways used in health information systems, 2015, 2015 10th Iberian Conference on Information Systems and Technologies (CISTI 2015).
Kadir, E.A., Shamsuddin, S.M., Rahman, T.A., Rahim, S.K.A., Supriyanto, E., Rosa, S.L. AIS algorithm for smart antenna application in WLAN, 2015, Journal of ICT Research and Applications, 8.
Ab Wahid, N.W.B., Jenni, K., Mandala, S., Supriyanto, E. Review on cloud computing application in P2P video streaming, 2015, Procedia Computer Science, 50.
Balaji, A., Vellayappan, M.V., John, A.A., Subramanian, A.P., Jaganathan, S.K., Supriyanto, E., Razak, S.I.A. An insight on electrospun-nanofibers-inspired modern drug delivery system in the treatment of deadly cancers, 2015, RSC Advances, 5.
Amini, N., Supriyanto, E., Marvibaigi, M., Majid, F.A.A. Human papilloma virus E6/E7 messenger RNA as a biomarker for detecting the risk evaluation of cervical cancer progression: Overview of recent clinical, 2015, Jurnal Teknologi, 75.
Pahl, C., Zare, M., Nilashi, M., de Faria Borges, M.A., Weingaertner, D., Detschew, V., Supriyanto, E., Ibrahim, O. Role of OpenEHR as an open source solution for the regional modelling of patient data in obstetrics, 2015, Journal of Biomedical Informatics, 55.
John, A.A., Subramanian, A.P., Vellayappan, M.V., Balaji, A., Jaganathan, S.K., Mohandas, H., Paramalinggam, T., Supriyanto, E., Yusof, M. Review: Physico-chemical modification as a versatile strategy for the biocompatibility enhancement of biomaterials, 2015, RSC Advances, 5.
Pahl, C., Mazle, H.A.B., Supriyanto, E. Design of virtual instrument for automatic temperature visualization in magnetic fields using LabVIEW in combination with fiber-optical temperature measurement, 2015, ICARA 2015 – Proceedings of the 2015 6th International Conference on Automation, Robotics and Applications.
Subramanian, A.P., John, A.A., Vellayappan, M.V., Balaji, A., Jaganathan, S.K., Supriyanto, E., Yusof, M. Gallic acid: Prospects and molecular mechanisms of its anticancer activity, 2015, RSC Advances, 5.
Lam, J., Abdullah, M.S., Supriyanto, E. Architecture for clinical decision support system (CDSS) using high risk pregnancy ontology, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
Aditya, Y., Jalil, N., Yew, H.T., Hau, Y.W., Supriyanto, E. Portable teleprenatology system for midwives in rural areas, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
Yew, H.T., Aditya, Y., Satrial, H., Supriyanto, E., Hau, Y.W. Telecardiology system for fourth generation heterogeneous wireless networks, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
Jaganathan, S.K., Balaji, A., Vellayappan, M.V., Asokan, M.K., Subramanian, A.P., John, A.A., Supriyanto, E., Razak, S.I.A., Marvibaigi, M. A review on antiproliferative and apoptotic activities of natural honey, 2015, Anti-Cancer Agents in Medicinal Chemistry, 15.
Jaganathan, S.K., Vellayappan, M.V., Narasimhan, G., Supriyanto, E., Dewi, D.E.O., Narayanan, A.L.T., Balaji, A., Subramanian, A.P., Yusof, M. Chemopreventive effect of apple and berry fruits against colon cancer, 2014, World Journal of Gastroenterology, 20.
Evizal, Rosa, S.L., Supriyanto, E., Rahman, T.A., Rahim, S.K.A., Moradikordalivand, A.
Switched beam smart antenna for wireless local area network, 2014, International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), 1.
Evizal, Rosa, S.L., Shamsuddin, S.M., Supriyanto, E., Sutopo, W. Food traceability and security in supply chain using RFID technology, 2014, International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), 1.
Jaganathan, S.K., Vellayappan, M.V., Narasimhan, G., Supriyanto, E. Role of pomegranate and citrus fruit juices in colon cancer prevention, 2014, World Journal of Gastroenterology, 20.
Satria, M.H., Yunus, J.B., Supriyanto, E. 802.11s QoS routing for telemedicine service, 2014, International Journal of Electrical and Computer Engineering, 4.
Mohd Zahid, M.S., Abdullah, A.H., Supriyanto, E. Application of mobile cloud computing in care pathways, 2014, 2014 IEEE Canada International Humanitarian Technology Conference (IHTC 2014).
Kadir, E.A., Shamsuddin, S.M., Supriyanto, E., Rahman, T.A., Rahim, S.K.A., Rosa, S.L. Multi bands antenna for wireless communication and mobile system, 2014, International Journal of Circuits, Systems and Signal Processing, 8.
Erliza, A., Zakaria, R., Sutopo, W., Widiyanto, A., Supriyanto, E. Formulation strategy for promoting investment of technopolis: A case study, 2014, Lecture Notes in Engineering and Computer Science, 2210.
Marvibaigi, M., Supriyanto, E., Amini, N., Abdul Majid, F.A., Jaganathan, S.K. Preclinical and clinical effects of mistletoe against breast cancer, 2014, BioMed Research International, 2014.
Jalil, N., Pahl, C., Kadiman, S., Supriyanto, E. Design and implementation of a telehealth platform for prenatal management in rural and remote areas, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences: “Miri, Where Engineering in Medicine and Biology and Humanity Meet”.
Nakphu, N., Dewi, D.E.O., Rizqie, M.Q., Supriyanto, E., Mohd Faudzi, A.A., Kho, D.C.C., Kadiman, S., Rittipravat, P. Apical four-chamber echocardiography segmentation using Marker-controlled Watershed segmentation, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Risman, N.S., Muttakin, I., Mahfooz, R., Hau, Y.W., Supriyanto, E., Nayan, N.A., Jaafar, R. PVDF sensor design and FPGA implementation of ultrasound power measurement, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Klemm, M., Baumgarten, D., Supriyanto, E., Schweitzer, D. Investigation of the stretched exponentials method for an application in fluorescence lifetime imaging ophthalmoscopy (FLIO), 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Kho, D.C.C., Mohd Faudzi, A.A., Dewi, D.E.O., Supriyanto, E. Characteristics of wireless technology for healthcare applications: An overview, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Aditya, Y.N., Pahl, C., Supriyanto, E. Review and design of a midwife prenatal kit for examinations in developing regions, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Pohl, C., Mohd Ali, R., Chand, S.J.H., Tamin, S.S., Omar, A.F., Hamzah, N., Nazirun, N.N.N., Supriyanto, E. Interdisciplinary approach to multimodal image fusion for vulnerable plaque detection, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Hoo, N.K., Klemm, M., Supriyanto, E., Baumgarten, D. Effects of excitation coil configurations in magnetorelaxometry imaging of magnetic nanoparticles, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Bal, P., Shamsir, S., Warid, N., Yahya, A., Yunus, J., Supriyanto, E., Ngim, C.F. MHealth application: Mobile thalassemia patient management application, 2014, IECBES 2014, Conference Proceedings – 2014 IEEE Conference on Biomedical Engineering and Sciences.
Jaganathan, S.K., Mondhe, D., Wani, Z.A., Supriyanto, E. Evaluation of selected honey and one of its phenolic constituent eugenol against L1210 lymphoid leukemia, 2014, Scientific World Journal, 2014.
Rizqie, Q., Pahl, C., Dewi, D.E.O., Ayob, M.A., Maolana, I., Hermawan, R., Soetikno, R.D., Supriyanto, E. 3D coordinate reconstruction from 2D X-ray images for guided lung biopsy, 2014, WSEAS Transactions on Biology and Biomedicine, 11.
Lestari, F., Ismail, K., Hamid, A.A., Supriyanto, E., Hisbunnazar, Sutupo, W. Measuring supply chain using SCOR model in palm oil downstream industry: A review, 2014, Lecture Notes in Engineering and Computer Science, 2.
Lestari, F., Ismail, K., Hamid, A.A., Supriyanto, E., Yanti, N., Sutupo, W. Supply chain configuration using hybrid SCOR model and discrete event simulation, 2014, Lecture Notes in Engineering and Computer Science, 2.
Marvibaigi, M., Amini, N., Supriyanto, E., Jamil, S., Majid, F.A.A., Khangholi, S. Total phenolic content, antioxidant and antibacterial properties of scurrula ferruginea extracts, 2014, Jurnal Teknologi, 70.
As’ari, M.A., Sheikh, U.U., Supriyanto, E. XZ-shape histogram for human-object interaction activity recognition based on Kinect-like depth image, 2014, WSEAS Transactions on Signal Processing, 10.
Satria, M.H., Yunus, J.B., Supriyanto, E. Emergency prenatal telemonitoring system in wireless mesh network, 2014, Telkomnika (Telecommunication Computing Electronics and Control), 12.
Maarasyid, C., Muhamad, I.I., Supriyanto, E. Potential source and extraction of Vitamin E from palm-based oils: A review, 2014, Jurnal Teknologi (Sciences and Engineering), 69.
Jaganathan, S.K., Mohandas, H., Sivakumar, G., Kasi, P., Sudheer, T., Avineri Veetil, S., Murugesan, S., Supriyanto, E. Enhanced blood compatibility of metallocene polyethylene subjected to hydrochloric acid treatment for cardiovascular implants, 2014, BioMed Research International, 2014.
Jaganathan, S.K., Supriyanto, E., Murugesan, S., Balaji, A., Asokan, M.K. Biomaterials in cardiovascular research: Applications and clinical implications, 2014, BioMed Research International, 2014.
As’Ari, M.A., Sheikh, U.U., Supriyanto, E. 3D shape descriptor for object recognition based on Kinect-like depth image, 2014, Image and Vision Computing, 32.
As’Ari, M.A., Sheikh, U.U., Supriyanto, E. 3D shape descriptor for activities of daily living (ADLs) recognition based on kinect-like depth images, 2013, Journal of Medical Imaging and Health Informatics, 3.
Baumgarten, D., Eichardt, R., Crevecoeur, G., Supriyanto, E., Haueisen, J. Magnetic nanoparticle imaging by random and maximum length sequences of inhomogeneous activation fields, 2013, Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS).
Muttakin, I., Supriyanto, E. Medical ultrasound power measurement system using PVDF sensor and FPGA technology, 2013, Conference Record – IEEE Instrumentation and Measurement Technology Conference.
Mohandas, H., Sivakumar, G., Kasi, P., Jaganathan, S.K., Supriyanto, E. Microwave-assisted surface modification of metallocene polyethylene for improving blood compatibility, 2013, BioMed Research International, 2013.
Salim, M.I.M., Supriyanto, E., Haueisen, J., Ariffin, I., Ahmad, A.H., Rosidi, B. Measurement of bioelectric and acoustic profile of breast tissue using hybrid magnetoacoustic method for cancer detection, 2013, Medical and Biological Engineering and Computing, 51.
Lai, K.W., Supriyanto, E. Future improvements, 2013, SpringerBriefs in Applied Sciences and Technology, 9789814021951.
Lai, K.W., Supriyanto, E. Medicine and engineering related researches on the utility of two dimensional nuchal translucency, 2013, SpringerBriefs in Applied Sciences and Technology, 9789814021951.
Lai, K.W., Supriyanto, E. Introduction, 2013, SpringerBriefs in Applied Sciences and Technology, 9789814021951.
Lai, K.W., Supriyanto, E. Designs and implementation of three dimensional nuchal translucency, 2013, SpringerBriefs in Applied Sciences and Technology, 9789814021951.
Lai, K.W., Supriyanto, E. Clinical tests and measurements, 2013, SpringerBriefs in Applied Sciences and Technology, 9789814021951.
Jaganathan, S.K., Supriyanto, E., Mandal, M. Events associated with apoptotic effect of p -Coumaric acid in HCT-15 colon cancer cells, 2013, World Journal of Gastroenterology, 19.
Wee, L.K., Chai, H.Y., Samsury, S.R.B., Mujamil, N.F.B., Supriyanto, E. Comparative studies of two dimensional and three dimensional ultrasonic nuchal translucency in trisomy Assessments, 2012, Anais da Academia Brasileira de Ciencias, 84.
As’ari, M.A., Supriyanto, E., Sheikh, U.U. The evaluation of shape distribution for object recognition based on kinect-like depth image, 2012, Proceedings – 2012 4th International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN 2012).
Hafizah, W.M., Supriyanto, E., Yunus, J. Feature extraction of kidney ultrasound images based on intensity histogram and gray level co-occurrence matrix, 2012, Proceedings – 6th Asia International Conference on Mathematical Modelling and Computer Simulation (AMS 2012).
Pahl, C., Supriyanto, E., Mahmood, N.H.B., Yunus, J. Cervix detection using squared error subtraction, 2012, Proceedings – 6th Asia International Conference on Mathematical Modelling and Computer Simulation (AMS 2012).
Jaganathan, S.K., Supriyanto, E. Antiproliferative and molecular mechanism of eugenol-induced apoptosis in cancer cells, 2012, Molecules, 17.
Wee, L.K., Chai, H.Y., Supriyanto, E. Three dimensional nuchal translucency assessment using magnetic resonance reconstruction imaging, 2012, Journal of Scientific and Industrial Research, 71.
Muttakin, I., Arif, N.M., Nooh, S.M., Supriyanto, E. Analog SPICE implementation of multi-frequency ultrasound system, 2012, International Journal of Circuits, Systems and Signal Processing, 6.
Nilghaz, A., Wicaksono, D.H.B., Gustiono, D., Abdul Majid, F.A., Supriyanto, E., Abdul Kadir, M.R. Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique, 2012, Lab on a Chip, 12.
Supriyanto, E., Jusoh, N., Abdul-Aziz, A. Multilayered membrane and the effect of additional layer to glucose biosensor performances, 2011, Recent Researches in Circuits, Systems and Signal Processing – Proc. of the 15th WSEAS Int. Conf. on Circuits, Part of the 15th WSEAS CSCC Multiconference, Proc. of the 5th Int. Conf. on CSS’11.
Supriyanto, E., Muttakin, I., Fathil, M.H.M., Omar, C. Low cost PVDF sensor casing for ultrasound power measurement, 2011, Recent Researches in Circuits, Systems and Signal Processing – Proc. of the 15th WSEAS Int. Conf. on Circuits, Part of the 15th WSEAS CSCC Multiconference, Proc. of the 5th Int. Conf. on CSS’11.
Supriyanto, E., En, J.S.Z., Omar, S.M.N. Myofascial Pain Syndrome trigger point detection based on ultrasound image, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Arooj, A., Wui, Y.J., Supriyanto, E. Preliminary step towards renal nomogram in Malaysian adult population, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Wider, M., Myint, Y.M. Ultrasound appendix image segmentation using histogram thresholding and image enhancement using noise filtering technique, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Hafizah, W.M., Wui, Y.J., Arooj, A. Automatic non invasive kidney volume measurement based on ultrasound image, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Wee, L.K., Wui, Y.J., Isa, N.M., Rosidi, B. Segmentation of prostate tumor for gamma image using region growing method, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Arif, N.M., Rusli, A.H., Humaimi, N. Semi-automatic thyroid area measurement based on ultrasound image, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Wee, L.K., Chai, H.Y., Supriyanto, E. Extended robust diffusion algorithm for two dimensional ultrasonic images, 2011, Recent Researches in System Science – Proceedings of the 15th WSEAS International Conference on Systems, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Pista, N.A.M., Ismail, L.H., Rosidi, B., Mengko, T.L. Automatic detection system of cervical cancer cells using color intensity classification, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Jamlos, M.A., Kheung, L.K. Segmentation of carotid artery wall towards early detection of alzheimer disease, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Zulkifli, N.S.A., Baigi, M.M., Humaimi, N., Rosidi, B. Abnormal tissue detection of breast ultrasound image using combination of morphological technique, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Wee, L.K., Supriyanto, E. A novel programmable waveform generator for ultrasound therapy machine using FPGA, 2011, Recent Researches in System Science – Proceedings of the 15th WSEAS International Conference on Systems, Part of the 15th WSEAS CSCC Multiconference.
Wee, L.K., Chai, H.Y., Wen, L.S., Supriyanto, E. Two dimensional automated movement ultrasound breast scanning system, 2011, Recent Researches in System Science – Proceedings of the 15th WSEAS International Conference on Systems, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Hafizah, W.M., Yun, W.W., Jamlos, M. Ultrasound pancreas segmentation: A new approach towards detection of diabetes mellitus, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Tahir, N.A., Nooh, S.M. Automatic ultrasound kidney’s centroid detection system, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Supriyanto, E., Mulyadi, I.H., Priya, R.S., Ismail, L.H. Medical ontology based tropical diseases information management system, 2011, Recent Researches in Computer Science – Proceedings of the 15th WSEAS International Conference on Computers, Part of the 15th WSEAS CSCC Multiconference.
Chai, H.Y., Wee, L.K., Supriyanto, E. Edge detection in ultrasound images using speckle reducing anisotropic diffusion in Canny edge detector framework, 2011, Recent Researches in System Science – Proceedings of the 15th WSEAS International Conference on Systems, Part of the 15th WSEAS CSCC Multiconference.
Nilghaz, A., Wicaksono, D.H.B., Supriyanto, E. Simultaneous multiple assays on microfluidic cloth-based analytical devices, 2011, Proceedings of 2011 2nd International Conference on Instrumentation Control and Automation (ICA 2011).
Sumarang, N.M.A., Satria, M.H., Supriyanto, E. Ultrasound time mapping based human face identification system, 2011, Proceedings – International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering 2011 (ICICI-BME 2011).
Wee, L.K., Yun, L.M., See, T.L., Supriyanto, E. Comparison studies of 2D and 3D ultrasound biparietal diameter for gestational age estimation, 2011, Proceedings – International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering 2011 (ICICI-BME 2011).
Mulyadi, I.H., Sumarang, N.M.A., Safri, N.M., Supriyanto, E. Effective bandwidth allocation algorithm for medical device wireless network, 2011, Proceedings – International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering 2011 (ICICI-BME 2011).
Wee, L.K., Chai, H.Y., Supriyanto, E. An object-oriented approach of generic diffusion computing for three dimensional ultrasound volumetric images, 2011, International Journal of Physical Sciences, 6.
Muttakin, I., Yu, Y.S., Mansor, M.M., Fathil, M.H.M., Ibrahim, I., Ariffin, I., Omar, C., Supriyanto, E. Low cost design of precision medical ultrasound power measurement system, 2011, International Journal of Circuits, Systems and Signal Processing, 5.
Wee, L.K., Supriyanto, E. Innovative waveform generator designs for ultrasound therapy machine using programmable FPGA approaches, 2011, International Journal of Mathematical Models and Methods in Applied Sciences, 5.
Wee, L.K., Wen, L.S., Supriyanto, E. Computerized mechanical movement control system for two dimensional ultrasound breast scanning, 2011, International Journal of Mathematics and Computers in Simulation, 5.
Putra, E.H., Supriyanto, E., Bin Din, J., Satria, H. Cross layer design of wireless LAN based on H.264/SVC and IEEE 802.11e, 2011, Proceedings of the 2011 International Conference on Electrical Engineering and Informatics (ICEEI 2011).
Wee, L.K., Chai, H.Y., Supriyanto, E. Interactive computing and measurement in three dimensional ultrasound fetal volumetric reconstruction using visualization toolkit, 2011, International Journal of Physical Sciences, 6.
Hafizah, W.M., Yun, W.W., Supriyanto, E. Optimization of pancreas measurement techniques based on ultrasound images, 2011, WSEAS Transactions on Biology and Biomedicine, 8.
Wee, L.K., Chai, H.Y., Supriyanto, E. Computerized nuchal translucency three dimensional reconstruction, visualization and measurement for trisomy 21 prenatal early assessment, 2011, International Journal of Physical Sciences, 6.
Wee, L.K., Chai, H.Y., Supriyanto, E. Three dimensional nuchal translucency ultrasound segmentation using region growing for trisomy 21 early assessment, 2011, International Journal of Physical Sciences, 6.
Wee, L.K., Chai, H.Y., Supriyanto, E. Computerized anisotropic diffusion of two dimensional ultrasonic images using multi-direction spreading approaches, 2011, WSEAS Transactions on Biology and Biomedicine, 8.
Wee, L.K., Chai, H.Y., Supriyanto, E. Surface rendering of three dimensional ultrasound images using VTK, 2011, Journal of Scientific and Industrial Research, 70.
Wee, L.K., Supriyanto, E., Wui, Y.J., Md Isa, N., Rosidi, B. Prostate tumor segmentation for Gamma image using region growing approaches, 2011, WSEAS Transactions on Biology and Biomedicine, 8.
Chai, H.Y., Wee, L.K., Supriyanto, E. Ultrasound images edge detection using anisotropic diffusion in canny edge detector framework, 2011, WSEAS Transactions on Biology and Biomedicine, 8.
Salim, M.I.M., Tumiran, M.A., Ahmmad, S.N.Z., Ariffin, I., Ahmad, A.H., Rosidi, B., Supriyanto, E. Measurement of ultrasound attenuation for normal and pathological mice breast tissue using 10mhz ultrasound wave, 2010, International Conference on Visualization, Imaging and Simulation.
Sudirman, R., Kuan, T.M., Yong, C.Y., Supriyanto, E. Effective support system for language assessment and training of special children, 2010, Proceedings of 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2010).
Kuan, T.M., Supriyanto, E. Effective support system for language assessment and training for special children, 2010, 9th WSEAS International Conference on Telecommunications and Informatics (TELE-INFO ’10).
Jiar, Y.K., Supriyanto, E., Satria, H., Kuan, T.M., Han, Y.E. Interactive cognitive assessment and training support system for special children, 2010, 9th WSEAS International Conference on Telecommunications and Informatics (TELE-INFO ’10).
Supriyanto, E., Jiar, Y.K., Muttakin, I., Ariffin, I., Yu, Y.S. A novel FPGA based platform for ultrasound power measurement, 2010, Proceedings – 2010 3rd International Conference on Biomedical Engineering and Informatics (BMEI 2010), 4.
Supriyanto, E., Wee, L.K., Min, T.Y. Ultrasonic marker pattern recognition and measurement using artificial neural network, 2010, 9th WSEAS International Conference on Signal Processing (SIP ’10).
Wee, L.K., Miin, L., Supriyanto, E. Automated risk calculation for trisomy 21 based on maternal serum markers using trivariate lognormal distribution, 2010, 12th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS ’10).
Wee, L.K., Supriyanto, E. Automatic detection of fetal nasal bone in 2 dimensional ultrasound image using map matching, 2010, 12th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS ’10).
Supriyanto, E., Satria, H., Siong, T.K. Medical data security model for early intervention support system based on HIPAA, 2010, 9th WSEAS International Conference on Telecommunications and Informatics (TELE-INFO ’10).
Salim, M.I.M., Tumiran, M.A., Makhtar, S.N., Rosidi, B., Ariffin, I., Ahmad, A.H., Supriyanto, E. Quantitative analysis of hybrid magnetoacoustic method for detection of normal and pathological breast tissue, 2010, 12th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS ’10).
Supriyanto, E., Jiar, Y.K., Oon, T.Y., Kuan, T.M. Facial tracking based camera motion control system, 2010, 9th WSEAS International Conference on Telecommunications and Informatics (TELE-INFO ’10).
Hafizah, M., Kok, T., Supriyanto, E. Development of 3D image reconstruction based on untracked 2D fetal phantom ultrasound images using VTK, 2010, WSEAS Transactions on Signal Processing, 6.
Kuan, T.M., Supriyanto, E., Jiar, Y.K., Han, Y.E. Development of an effective assessment and training support system for cognitive ability for special children, 2010, WSEAS Transactions on Computers, 9.
Wee, L.K., Miin, L., Supriyanto, E. Automated trisomy 21 assessment based on maternal serum markers using trivariate lognormal distribution, 2010, WSEAS Transactions on Systems, 9.
Kuan, T.M., Jiar, Y.K., Supriyanto, E. Language assessment and training support system (LATSS) for Down syndrome children under 6 years old, 2010, WSEAS Transactions on Information Science and Applications, 7.
Wee, L.K., Min, T.Y., Arooj, A., Supriyanto, E. Nuchal translucency marker detection based on artificial neural network and measurement via bidirectional iteration forward propagation, 2010, WSEAS Transactions on Information Science and Applications, 7.
Salim, M.I.M., Tumiran, M.A., Makhtar, S.N., Rosidi, B., Ariffin, I., Ahmad, H., Supriyanto, E. Hybrid magnetoacoustic method for breast tumor detection: An in-vivo and in-vitro modelling and analysis, 2010, WSEAS Transactions on Information Science and Applications.
Wee, L.K., Arooj, A., Supriyanto, E. Computerized automatic nasal bone detection based on ultrasound fetal images using cross correlation techniques, 2010, WSEAS Transactions on Information Science and Applications, 7.
Putra, E.H., Supriyanto, E., Din, J., Satria, H. Cross layer design of IEEE 802.11e enhanced distributed channel access wireless network for telemedicine application, 2009, 2009 Innovative Technologies in Intelligent Systems and Industrial Applications (CITISIA 2009).
Mulyadi, I.H., Supriyanto, E., Safri, N.M., Satria, M.H. Wireless medical interface using zigbee and bluetooth technology, 2009, Proceedings – 2009 3rd Asia International Conference on Modelling and Simulation (AMS 2009).
Putra, E.H., Supriyanto, E., Din, J., Satria, H. Cross layer design of wireless LAN for telemedicine application, 2009, Proceedings – 2009 3rd Asia International Conference on Modelling and Simulation (AMS 2009).
Supriyanto, E., Lau, E.X., Seow, S.C. Automatic image quality monitoring system for low cost ultrasound machine, 2008, , 5th Int. Conference on Information Technology and Applications in Biomedicine, ITAB 2008 in conjunction with 2nd Int. Symposium and Summer School on Biomedical and Health Engineering (IS3BHE 2008).
Supriyanto, E., Goebel, H. An accurate ferroelectric capacitor model for signal slew rates from DC up to 800 MV/s, 2004, Proceedings of the International Conference on Microelectronics, 24.
Supriyanto, E., Goebel, H. Characterization of ferroelectric capacitors over wide frequency range, 2003, Proceedings of the International Conference on Microelectronics (ICM).
Supriyanto, E., Schultz, I., Ullmann, M., Goebel, H. Ferroelectric capacitor compact model including dynamic and temperature behavior, 2002, IEEE International Symposium on Applications of Ferroelectrics.
Arfianto, A.Z., Rahmat, M.B., Dhiyavia, F., Santoso, T.B., Gunantara, N., Supriyanto, E., Ardhana, V.Y.P. Autopilot unmanned smart boat vehicle (Ausv) communication with lora rfm95, 2020, International Journal on Informatics Visualization, 4.
Widodo, S., Cahya, R.B., Nasrullah, Y., Supriyanto, E., Rubiono, G. Design of the node coordinator based on WSN network as fisherman vessel monitoring system, 2018, IOP Conference Series: Earth and Environmental Science, 156.
Wardihani, E.D., Purbawati, E., Supriyanto, E. Analysis of multi-Source effect in underwater communication, 2017, 2017 IEEE International Conference on Communication, Networks and Satellite (COMNETSAT 2017).

Ahmad Zahran Md. Khudzari

Mani M.P., Jaganathan S.K., Khudzari A.Z. Evaluation of electrospun polyurethane scaffolds loaded with cerium oxide for bone tissue engineering, Journal of Industrial Textiles, 2022, 51:3413S–3429S.
Mani M.P., Jaganathan S.K., Ismail F.B., Khudzari A.Z. Compatible properties and behaviour of dually loaded electrospun polyurethane bone tissue scaffolds, Journal of Industrial Textiles, 2022, 51:1441S–1455S.
Mani M.P., Sadia M., Jaganathan S.K., Khudzari A.Z., Supriyanto E., Saidin S., Ramakrishna S., Ismail A.F., Faudzi A.A.M. A review on 3D printing in tissue engineering applications, Journal of Polymer Engineering, 2022, 42:243–265.
Mahmud F., Md Khuzari A.Z., Pau C.P., Ramli M.F., Jaffar N., Gaaffar I.F. Pre-assessment of machine learning approaches for patient length of stay prediction, Springer Proceedings in Physics, 2022, 273:369–378.
Thomas S.A., Md Khuzari A.Z., Abdul Kadir M.R., Osman K, Jeswant D., Taib I. The effect of spiral inducing chamber to left ventricular assist device outflow cannula, International Journal of Integrated Engineering, 2022, 14:62–67.
Khidhir N.A.B.M., Jaganathan S.K., Khudzari A.Z.M., Ismail A.F. Physicochemical and mechanical properties of electrospun polyurethane composite patch integrated with green synthesized cobalt nanoparticles for cardiac applications, Journal of the Textile Institute, 2022, 113:247–254.
Mustafa F.M., Shafli N.S., Kadir M.R.A., Aziz M.N.C., Osman K., Dillon J., Darlis N., Khudzari A.Z.M. The effect of parameter variation on spiral flow inducing cannula performances, 2021, Journal of Physics: Conference Series, 2071.
Hamid M.N., Osman K., Mohd Salleh Z., Rusli R.E., Kori M.I., Khudzari A.Z.M. Effect of airway stent on stenosed trachea, 2022, Lecture Notes in Mechanical Engineering.
Ang, Y.X., Md. Khudzari, A.Z., Mohamedali, M.S. Non-invasive treatment for coronary in-stent restenosis via wireless revascularization with nitinol active stent, 2021, IEEE Transactions on Biomedical Engineering.
Mani, M.P., Jaganathan, S.K., Khudzari, A.Z.M. Evaluation of electrospun polyurethane scaffolds loaded with cerium oxide for bone tissue engineering, 2021, Journal of Industrial Textiles.
Mani, M.P., Jaganathan, S.K., Ismail, A.F.B., Khudzari, A.Z.M. Compatible properties and behaviour of dually loaded electrospun polyurethane bone tissue scaffolds, 2021, Journal of Industrial Textiles.
Mohd Rashid, A.A.B., Jaganathan, S.K., Mohd Khudzari, A.Z., Ismail, A.F. Fabrication and characterization of fibrous polycaprolactone blended with natural green tea extracts using dual solvent systems, 2021, Autex Research Journal.
Nordin, S.A.B., Mani, M.P., Jaganathan, S.K., Khudzari, A.Z.M., Ismail, A.F. Fabrication and characterization of a novel wound scaffold based on polyurethane added with Channa striatus for wound dressing applications, 2020, International Journal of Polymer Analysis and Characterization, 25.
Shafii, N.S., Yamaguchi, R., Khudzari, A.Z.M., Tanaka, G., Saitoh, A., Ohta, M., Osman, K. hemodynamic and flow recirculation effect on rupture prediction of middle cerebral artery aneurysm, 2020, Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79.
Khidhir, N.A.B.M., Jaganathan, S.K., Khudzari, A.Z.M., Ismail, A.F. Physicochemical and mechanical properties of electrospun polyurethane composite patch integrated with green synthesized cobalt nanoparticles for cardiac applications, 2020, Journal of the Textile Institute.
Narruddin, W.N.H.B., Jaganathan, S.K., Khudzari, A.Z.M., Ismail, A.F. Effect of solvent on the physicochemical properties of electrospun nanocomposite with gamat oil and cerium oxide for potential medical engineering application, 2020, Journal of the Textile Institute.
Jaganathan, S.K., Prasath Mani, M., Khudzari, A.Z.M., Fauzi bin Ismail, A. Physicochemical assessment of tailor made fibrous polyurethane scaffolds incorporated with turmeric oil for wound healing applications, 2019, International Journal of Polymer Analysis and Characterization, 24.
Jaganathan, S.K., Mani, M.P., Khudzari, A.Z.M., Ismail, A.F., Ayyar, M., Rathanasamy, R. Enriched physicochemical and blood-compatible properties of nanofibrous polyurethane patch engrafted with juniper oil and titanium dioxide for cardiac tissue engineering, 2019, International Journal of Polymer Analysis and Characterization, 24.
Lukman, S.K., Al-Ashwal, R.H., Khudzari, A.Z.M., Saidin, S. Different amount of ginseng encapsulated in poly (lactic-co-glycolic acid) microcapsules: A preliminary study, 2019, AIP Conference Proceedings, 2155.
Jaganathan, S.K., Mani, M.P., Khudzari, A.Z.M. Electrospun combination of peppermint oil and copper sulphate with conducive physico-chemical properties for wound dressing applications, 2019, Polymers, 11.
Mani, M.P., Jaganathan, S.K., Khudzari, A.Z.M., Prabhakaran, P. Development of advanced nanostructured polyurethane composites comprising hybrid fillers with enhanced properties for regenerative medicine, 2019, Polymer Testing, 73.
Mani, M.P., Jaganathan, S.K., Md Khudzari, A.Z., Ismail, A.F. Green synthesis of nickel oxide particles and its integration into polyurethane scaffold matrix ornamented with groundnut oil for bone tissue engineering, 2019, International Journal of Polymer Analysis and Characterization, 24.
Empaling, S., Md Khudzari, A.Z., Kadir, M.R.A., Osman, K., Hudzari, A.H.M., Padzillah, M.H., Talib, I.A., Taib, M.E.A., Rahim, A.A.A. Spiral groove bearing geometry variation effect on left ventricular assist device impeller performance, 2019, CFD Letters, 11.
Hashim, N.H., Supriyanto, E., Mohd Warid, M.N., Md Khudzari, A.Z. computer guided hospital accreditation management system, 2018, Proceedings of the 2018 International Conference on Applied Engineering (ICAE 2018).
Mani, M.P., Jaganathan, S.K., Khudzari, A.Z., Rathanasamy, R., Prabhakaran, P. Single-stage electrospun innovative combination of polyurethane and neem oil: Synthesis, characterization and appraisal of blood compatibility, 2018, Journal of Bioactive and Compatible Polymers, 33.
Darlis, N., Osman, K., Padzillah, M.H., Dillon, J., Md Khudzari, A.Z. Modification of aortic cannula with an inlet chamber to induce spiral flow and improve outlet flow, 2018, Artificial Organs, 42.
Kadir, M.R.A., Aziz, M.A.A., Padzillah, M.H., Harun, M.N., Osman, K., Rahim, A.A.A., Taib, M.E.A., Khudzari, A.Z.M. Numerical study of a Left Ventricular Assist Device (LVAD) with different blade heights and tip clearances, 2018, International Journal of Integrated Engineering, 10.
Thomas, S.A., Empaling, S., Darlis, N., Osman, K., Dillon, J., Taib, I., Md Khudzari, A.Z. Computational modelling of flow and tip variations of aortic cannulae in cardiopulmonary bypass procedure, 2017, IOP Conference Series: Materials Science and Engineering, 243.
Ayyar, M., Mani, M.P., Jaganathan, S.K., Rathinasamy, R., Khudzari, A.Z., Krishnasamy, N.P. Surface, thermal and hemocompatible properties of novel single stage electrospun nanocomposites comprising polyurethane blended with bio oil™, 2017, Anais da Academia Brasileira de Ciencias, 89.
John, A.A., Jaganathan, S.K., Supriyanto, E., Khudzari, A.Z.M., Muhamad, I.I. Novel green surface modification of metallocene polyethylene by steam to enhance its hemocompatible properties, 2016, Journal of Applied Polymer Science, 133.
Razak, S.I.A., Wahab, I.F., Kadir, M.R.A., Khudzari, A.Z.M., Yusof, A.H.M., Dahli, F.N., Nayan, N.H.M., Joseph Sahaya Anand, T. Biomimetic growth of hydroxyapatite on kenaf fibers, 2016, BioResources, 11.
Balaji, A., Jaganathan, S.K., Supriyanto, E., Muhamad, I.I., Khudzari, A.Z.M. Microwave-assisted fibrous decoration of mPE surface utilizing Aloe vera extract for tissue engineering applications, 2015, International Journal of Nanomedicine, 10.
Taib, I., Hao, K.S., Shafii, N.S., Khudzari, A.Z.M., Osman, K. Finite element analysis for stent in patent ductus arteriosus (PDA), 2015, Proceedings – 2015 2nd International Conference on Biomedical Engineering (ICoBE 2015).
Abd Razak, S.I., Wahab, I.F., Fadil, F., Dahli, F.N., Md Khudzari, A.Z., Adeli, H. A review of electrospun conductive polyaniline based nanofiber composites and blends: Processing features, applications, and future directions, 2015, Advances in Materials Science and Engineering, 2015.
Yakub, F., Md. Khudzari, A.Z., Mori, Y. Recent trends for practical rehabilitation robotics, current challenges and the future, 2014, International Journal of Rehabilitation Research, 37.
Shafii, N.S., Darlis, N., Dillon, J., Osman, K., Khudzari, A.Z.M. The effect of internal profile on cannula outflow, 2014, WSEAS Transactions on Fluid Mechanics, 9.
Taib, I., Kadir, M.R.A., Azis, M.S.A., Khudzari, A.Z.M., Osman, K. Analysis of hemodynamic differences for stenting patent ductus arteriosus, 2013, Journal of Medical Imaging and Health Informatics, 3.
Khudzari, A.Z.M., Richens, D., Tansley, G.D. The effect of balloon pumping on mechanical heart valves, 2013, Journal of Medical Imaging and Health Informatics, 3.

Syafiqah Saidin

Alipal J., Saidin S., Abdullah H.Z., Idris M.I., Lee T.C. Physicochemical and cytotoxicity studies of a novel hydrogel nanoclay EPD coating on titanium made of chitosan/gelatin/halloysite for biomedical application, Materiald Chemistry and Physics, 2022, 290:126543.
Jumat M.A.Chevallier P.Mantovani D.Saidin S. Everolimus immobilisation using polydopamine intermediate layer on poly(l-lactic acid)/poly(d-lactic acid) scaffold for sustainable anti-proliferative drug release, Materials Today Communications, 2022, 31:103720.
Mani M.P., Sadia M., Jaganathan S.K., Khudzari A.Z., Supriyanto E., Saidin S., Ramakrishna S., Ismail A.F., Faudzi A.A.M. A review on 3D printing in tissue engineering applications, Journal of Polymer Engineering, 2022, 42:243–265.
Nasution A.K., Gustami H., Suprastio S., Fadillah M.A., Octavia J., Saidin S. Potential use of friction welding for fabricating semi-biodegradable bone screws, International Journal of Automotive and Mechanical Engineering, 2022, 19:9660–9667.
Asiri A., Saidin S., Sani M.H., Al-Ashwal R.H. Epidermal and fibroblast growth factors incorporated polyvinyl alcohol electrospun nanofibers as biological dressing scaffold, 2021, Scientific Reports, 11.
Mohd Yusoff M.F., Abu Kasim N.H., Himratul-Aznita W.H., Saidin S., Genasan K., Kamarul T., Radzi Z. Physicochemical, antibacterial and biocompatibility assessments of silver incorporated nano-hydroxyapatite synthesized using a novel microwave-assisted wet precipitation technique, 2021, Materials Characterization, 178.
Sheikh J., Swee T.T., Saidin S., Yahya A.B., Malik S.A., Yin J.S.S., Thye M.T.F. Bacterial disinfection and cell assessment post ultraviolet-C LED exposure for wound treatment, 2021, Medical and Biological Engineering and Computing, 59.
Saidin S., Jumat M.A., Mohd Amin N.A.A., Saleh Al-Hammadi A.S. Organic and inorganic antibacterial approaches in combating bacterial infection for biomedical application, 2021, Materials Science and Engineering C, 118.
Lo A.Z.K., Lukman S.K., Lai C.-H., Zain, N.M., Saidin S. Stingless bee honey incorporated cellulose hydrogel/poly(Lactic-co-glycolic acid) patch as an alternative treatment for Aphthous stomatitis, 2021, Cellulose Chemistry & Technology, 55.
Jumat M.A., Zahidin N.S., Zaini M.A.A., Fadzil N.A., Nur H., Saidin S. Incorporation of Acalypha indica extract in polyvinyl alcohol hydrogels: Physico-chemical, antibacterial and cell compatibility analyses, 2021, Jurnal Teknologi, 83.
Jumat M.A., Chevallier P., Mantovani D., Copes F., Razak S.I.A., Saidin S. Three-dimensional printed biodegradable poly(l-lactic acid)/(poly(d-lactic acid) scaffold as an intervention of biomedical substitute, 2021, Polymer-Plastics Technology and Materials, 60.
Gopal R., Lo A.Z.K., Masrol N.M., Lai C.-H, Zain N.M., Saidin S. Susceptibility of stingless bee, giant bee and asian bee honeys incorporated cellulose hydrogels in treating wound infection, 2021, Malaysian Journal of Fundamental and Applied Sciences, 17.
Zain N.M., Saidin S., Sosiawan A. Properties of tilapia collagen as a biomaterial for tissue engineering: A review, 2020, IOP Conference Series: Materials Science and Engineering, 932.
Li H.-Y., Lin H.-C., Huang B.-J., Lo A.Z.K., Saidin S., Lai C.-H. Size preferences uptake of glycosilica nanoparticles to MDA-MB-231 cell, 2020, Langmuir, 36.
Lo A.Z.K., Lukman S.K., Saidin S. Encapsulation of ginseng inside poly(lactic-co-glycolic acid)/polyaniline microcaspsules, 2020, Malaysian Journal of Medicine and Health Sciences, 16.
Tey S.Y., Shah A.M.M., Abidin M.S.Z., Saidin S. Design and Characterization of Impedance based E. Coli Sensor, 2020, IEEE International Conference on Semiconductor Electronics, Proceedings (ICSE), 2020-July.
Lukman S.K., Saidin S. Effects of different polyaniline emeraldine compositions in electrodepositing ginsenoside encapsulated poly(lactic-co-glycolic acid) microcapsules coating: Physicochemical characterization and in vitro evaluation, 2020, Journal of Biomedical Materials Research – Part A, 108.
Asiri A., Al-Ashwal R.H., Sani M.H., Saidin S. Effects of electrospinning voltage and flow rate on morphology of poly-vinyl alcohol nanofibers, 2019, Journal of Physics: Conference Series, 1372.
Abdul Halim H.N., Azaman A., Manaf H., Saidin S., Zulkapri I., Yahya A. Gait asymmetry assessment using muscle activity signal: A review of current methods, 2019, Journal of Physics: Conference Series, 1372.
Lukman S.K., Al-Ashwal R.H., Khudzari A.Z.M., Saidin S. Different amount of ginseng encapsulated in poly (lactic- co -glycolic acid) microcapsules: A preliminary study, 2019, AIP Conference Proceedings, 2155.
Lukman S.K., Al-Ashwal R.H., Sultana N., Saidin S. Electrodeposition of ginseng/polyaniline encapsulated poly(lactic-co-glycolic acid) microcapsule coating on stainless steel 316L at different deposition parameters, 2019, Chemical and Pharmaceutical Bulletin, 67.
Daud N.M., Tapsir Z., Idris A., Nasution A.K., Saidin S. Synthesization and characterization of chlorhexidine/calcium phosphate/poly(lactic-co-glycolic acid) bone cement, 2019, IOP Conference Series: Materials Science and Engineering, 532.
Mohd Daud N., Hussein Al-Ashwal R., Abdul Kadir M.R., Saidin S. Polydopamine-assisted chlorhexidine immobilization on medical grade stainless steel 316L: Apatite formation and in vitro osteoblastic evaluation, 2018, Annals of Anatomy, 220.
Daud N.M., Masri N.A., Nik Malek N.A.N., Abd Razak S.I., Saidin S. Long-term antibacterial and stable chlorhexidine-polydopamine coating on stainless steel 316L, 2018, Progress in Organic Coatings, 122.
Abdul Hanan M.R., Nasution A.K., Hussain R., Saidin S. Fabrication of poly(Lactic-co-glycolic acid)/calcium phosphate bone cement composite: Synthesization of calcium phosphate from crab shells, 2018, Jurnal Teknologi, 80.
Tapsir Z., Jamaludin F.H., Pingguan-Murphy B., Saidin S. Immobilisation of hydroxyapatite-collagen on polydopamine grafted stainless steel 316L: Coating adhesion and in vitro cells evaluation, 2018, Journal of Biomaterials Applications, 32.
Foong C.Y., Hamzah M.S.A., Razak S.I.A., Saidin S., Nayan N.H.M. Influence of poly(lactic acid) layer on the physical and antibacterial properties of dry bacterial cellulose sheet for potential acute wound healing materials, 2018, Fibers and Polymers, 19.
Daud N.M., Nik Malek N.A.N., Saidin S. Influence of coating time on immobilization of chlorhexidine on polydopamine grafted stainless steel 316L: Characterization, adsorption and cytotoxicity analyses, 2017, ACM International Conference Proceeding Series.
Lukman S.K., Saidin S., Lo Z.K., Al-Ashwal R.H. Ginseng encapsulated in poly (lactic-co-glycolic acid) microcapsules for cardiovascular application, 2017, ACM International Conference Proceeding Series.
Zahidin N.S., Saidin S., Zulkifli R.M., Muhamad I.I., Ya’akob H., Nur H. A review of Acalypha indica L. (Euphorbiaceae) as traditional medicinal plant and its therapeutic potential, 2017, Journal of Ethnopharmacology, 207.
Abdul Hanan M.R., Daud N.M., Ismail L.H., Saidin S. Synthesization and characterization of poly(lactic-co-glycolic acid) / calcium phosphate bone cement from crab shells, 2017, IOP Conference Series: Materials Science and Engineering, 201.
Saarani N.N., Jamuna-Thevi K., Shahab N., Hermawan H., Saidin S. Antibacterial efficacy of triple-layered poly(Lactic-co-glycolic acid)/nanoapatite/ lauric acid guided bone regeneration membrane on periodontal bacteria, 2017, Dental Materials Journal, 36.
Miswan Z., Lukman S.K., Abd Majid F.A., Loke M.F., Saidin S., Hermawan H. Drug-eluting coating of ginsenoside Rg1 and Re incorporated poly(lactic-co-glycolic acid) on stainless steel 316L: Physicochemical and drug release analyses, 2016, International Journal of Pharmaceutics, 515.
Tapsir Z., Saidin S. Synthesis and characterization of collagen-hydroxyapatite immobilized on polydopamine grafted stainless steel, 2016, Surface and Coatings Technology, 285.
Tajudin M.H.M., Tapsir Z., Ismail L.H., Saidin S. Formation of carbonated apatite layer in 1.5× simulated body fluid at different refreshing time, 2016, Key Engineering Materials, 705.
Mohd Daud N., Saeful Bahri I.F., Nik Malek N.A.N., Hermawan H., Saidin S. Immobilization of antibacterial chlorhexidine on stainless steel using crosslinking polydopamine film: Towards infection resistant medical devices, 2016, Colloids and Surfaces B: Biointerfaces, 145.
Nordin J.A., Prajitno D.H., Saidin S., Nur H., Hermawan H. Structure-property relationships of iron-hydroxyapatite ceramic matrix nanocomposite fabricated using mechanosynthesis method, 2015, Materials Science and Engineering C, 51.
Mustafa A.A., Matinlinna J.P., Saidin S., Abdul Kadir M.R. The influence of experimental silane primers on dentin bond strength and morphology: A laboratory and finite element analysis study, 2014, Journal of Prosthetic Dentistry, 112.
Madfa A.A., Kadir M.R.A., Kashani J., Saidin S., Sulaiman E., Marhazlinda J., Rahbari R., Abdullah B.J.J., Abdullah H., Abu Kasim N.H. Stress distributions in maxillary central incisors restored with various types of post materials and designs, 2014, Medical Engineering and Physics, 36.
Saidin S., Chevallier P., Abdul Kadir M.R., Hermawan H., Mantovani D. Polydopamine as an intermediate layer for silver and hydroxyapatite immobilisation on metallic biomaterials surface, 2013, Materials Science and Engineering C, 33.
Saidin S., Abdul Kadir M.R., Sulaiman E., Abu Kasim N.H. Effects of different implant-abutment connections on micromotion and stress distribution: Prediction of microgap formation, 2012, Journal of Dentistry, 40.
Sudirman, Saidin S., Mat Safri N. Study of electroencephalography signal of autism and down syndrome children using FFT, 2010, ISIEA 2010 – 2010 IEEE Symposium on Industrial Electronics and Applications.
Saidin S., Abdul Kadir M.R., Sulaiman E., Kassim N.A. Finite element analysis on internal hexagonal and internal conical abutment, 2010, Proceedings of 2010 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2010).

Hau Yuan Wen

Al-Shwaheen T.I., Moghbel M., Hau Y.W., Ooi C.Y. Use of learning approaches to predict clinical deterioration in patients based on various variables: A review of the literature, Artificial Intelligence Review, 2022, 55:1055–1084.
Al-Shwaheen T.I., Moghbel M., Hau Y.W., Ooi C.Y. Use of learning approaches to predict clinical deterioration in patients based on various variables: A review of the literature, 2021, Artificial Intelligence Review.
Alshwaheen T.I., Hau Y.W., Ass’Ad N., Abualsamen M.M. A Novel and reliable framework of patient deterioration prediction in intensive care unit based on long short-term memory-recurrent neural network, 2021, IEEE Access, 9.
Lim J.H., Hau Y.W., Yew H.T., Dass S.B. ASIC Layout design-space exploration of pan-and-tompkins pre-processing algorithm for high efficiency electrocardiogram monitor, 2020, IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET 2020).
Chieng T.M., Hau Y.W., Omar Z.B., Lim C.W. Qualitative and quantitative performance comparison of ECG noise reduction and signal enhancement method based on various digital filter designs and discrete wavelet transform, 2020, International Journal of Computing and Digital Systems, 90.
Moghbel M., Ooi C.Y., Ismail N., Hau Y.W., Memari N. A review of breast boundary and pectoral muscle segmentation methods in computer-aided detection/diagnosis of breast mammography, 2020, Artificial Intelligence Review, 53.
Abdel Latif Al-Shwaheen T.I., Hau Y.W. A new model for tracking and detection of deterioration of vital signs based on artificial neural network, 2019, Journal of Theoretical and Applied Information Technology, 97.
Yusof M.A., Hau Y.W. Mini home-based vital sign monitor with android mobile application (myVitalGear), 2019, 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2018).
Goh V.H., Hau Y.W. Android-based mobile application for home-based electrocardiogram monitoring device with google technology and bluetooth wireless communication, 2019, 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2018).
Chieng T.M., Hau Y.W., Omar Z. The study and comparison between various digital filters for ECG de-noising, 2019, 2018 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES 2018).
Chua R.N., Hau Y.W., Tiew C.M., Hau W.L. Investigation of attention deficit/hyperactivity disorder assessment using electro interstitial scan based on chronoamperometry technique, 2019, IEEE Access, 7.
Chieng T.M., Hau Y.W., Omar Z.B., Lim C.W. Ventricular tachyarrhythmias prediction methods and its prognostic features: A review, 2019, International Journal of Computing and Digital Systems, 8.
Yusof M.A., Fung S.X., Low W.L., Lim C.W., Hau Y.W. Miniaturized and portable home-based vital sign monitor design with android mobile application, 2019, International Journal of Integrated Engineering, 11.
Lim H.W., Hau Y.W., Othman M.A., Lim C.W. Embedded system-on-chip design of atrial fibrillation classifier, 2018, Proceedings – International SoC Design Conference 2017 (ISOCC 2017).
Chia N.G., Hau Y.W., Jamaludin M.N. Robust arrhythmia classifier using wavelet transform and support vector machine classification, 2017, 2017 IEEE 13th International Colloquium on Signal Processing and its Applications (CSPA 2017).
Tang J.W., Hau Y.W., Shaikh-Husin N., Marsono M.N. Application profiling and mapping on NoC-based MPSoC emulation platform on reconfigurable logic, 2017, Telkomnika (Telecommunication Computing Electronics and Control), 15.
Sirkunan J., Ooi C.Y., Shaikh-Husin N., Hau Y.W., Marsono M.N. Hardware transactional memory architecture with adaptive version management for multi-processor FPGA platforms ,2017, Journal of Systems Architecture, 73.
Yew H.T., Supriyanto E., Satria M.H., Hau Y.W. New vertical handover method to optimize utilization of wireless local area network in high-speed environment, 2016, PLoS ONE, 11.
Yew H.T., Supriyanto E., Satria M.H., Hau Y.W. Adaptive network selection mechanism for telecardiology system in developing countries, 2016, 3rd IEEE EMBS International Conference on Biomedical and Health Informatics (BHI 2016).
Lin Kam K., Wen Hau Y. Platform independent web-based telecardiology for connected heart care, 2016, Jurnal Teknologi, 78.
Hashim M.A., Wen Hau Y., Baktheri R. Efficient QRS complex detection algorithm implementation on soc-based embedded system, 2016, Jurnal Teknologi, 78.
Lim H.W., Hau Y.W., Lim C.W., Othman M.A. Artificial intelligence classification methods of atrial fibrillation with implementation technology, 2016, Computer Assisted Surgery, 21.
Risman N.S., Yassin S.N., Nayan N.A., Wei S.C., Hau Y.W. Implementation of heart rate variability analysis algorithm on FPGA platform, 2016, International Journal of Applied Engineering Research, 11.
Lin Kam K., Weng Ow T., Yong Chia W., Bakhteri R., Ramli N., Wen Hau Y. SoC-based biomedical embedded system design of arrhythmia detector, 2016, Jurnal Teknologi, 78.
Tang J.W., Hau Y.W., Marsono M.N. Hardware/software partitioning of embedded system-on-chip applications, 2015, IEEE/IFIP International Conference on VLSI and System-on-Chip (VLSI-SoC 2015).
Hashim A., Bakhteri R., Hau Y.W. Arrhythmia detection based on hermite polynomial expansion and multilayer perceptron on System-On-Chip implementation, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
Tung Yew H., Supriyanto E., Satria M.H., Wen Hau Y. Autonomous network selection strategy for telecardiology application in heterogeneous wireless networks, 2015, Jurnal Teknologi, 77.
Yew H.T., Supriyanto E., Haikal Satria M., Hau Y.W. User-centric based vertical handover decision algorithm for telecardiology application in heterogeneous networks, 2015, Jurnal Teknologi, 77.
Bakhteri R., Satti T.A., Khalil-Hani M., Wen H.Y. Microprocessor-based athlete health monitoring device based on heart rate and stride length calculation, 2015, Jurnal Teknologi, 74.
Sirkunan J., Ooi C.Y., Shaikh-Husin N., Hau Y.W., Marsono M.N. Adaptive configurable transactional memory for multi-processor FPGA platforms, 2015, Proceedings – 2015 IEEE 23rd Annual International Symposium on Field-Programmable Custom Computing Machines (FCCM 2015).
Aditya Y., Jalil N., Yew H.T., Hau Y.W., Supriyanto E. Portable teleprenatology system for midwives in rural areas, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
Yew H.T., Aditya Y., Satrial H., Supriyanto E., Hau Y.W. Telecardiology system for fourth generation heterogeneous wireless networks, 2015, ARPN Journal of Engineering and Applied Sciences, 10.
Tei Y.Z., Hau Y.W., Shaikh-Husin N., Andromeda T., Marsono M.N. Energy-aware network-on-chip application mapping based on domain knowledge genetic algorithm, 2014, International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), 1.
Sirkunan J., Ooi C.Y., Shaikh-Husin N., Hau Y.W., Andromeda T., Marsono M.N. Configurable version management hardware transactional memory for multi-processor platform, 2014, International Conference on Electrical Engineering, Computer Science and Informatics (EECSI), 1.
Kam K.L., Ramane V., Ooi C.Y., Hau Y.W. Development of platform-independent web-based telecardiology application for pilot case study, 2014, IEEE Conference on Biomedical Engineering and Sciences: “Miri, Where Engineering in Medicine and Biology and Humanity Meet“.
Hashim A., Ooi C.Y., Bakhteri R., Hau Y.W. Comparative study of electrocardiogram QRS complex detection algorithm on Field Programmable gate array platform, 2014, IEEE Conference on Biomedical Engineering and Sciences: “Miri, Where Engineering in Medicine and Biology and Humanity Meet”.
Chia W.Y., Ow T.W., Ramli N., Isaak S., Hau Y.W. On-board touch screen graphical interface design for SoC-based arrhythmia detector, 2014, 2014 2nd International Conference on Electronic Design (ICED 2014).
Risman N.S., Yassin S.N.M., Sia C.W., Hau Y.W., Nayan N.A. FPGA design and implementation of Electrocardiogram biomedical embedded system, 2014, IEEE Conference on Biomedical Engineering and Sciences: “Miri, Where Engineering in Medicine and Biology and Humanity Meet”.
Loo L.K., Ooi C.Y., Liew V.Y., Hau Y.W., Marsono M.N. Packet logging mechanism for adaptive online fault detection on network-on-chip, 2014, IEEE International Symposium on Circuits and Systems.
Sirkunan J., Ooi C.Y., Shaikh-Husin N., Hau Y.W., Marsono M.N. Hardware transactional memory on multi-processor FPGA platform, 2014, IEEE International Symposium on Circuits and Systems.
Tan T.H., Ooi C.Y., Hau Y.W., Shaikh-Husin N., Marsono M.N. Remote dynamically reconfigurable platform using NetFPGA, 2014, IEEE International Symposium on Circuits and Systems.
Risman N.S., Muttakin I., Mahfooz R., Hau Y.W., Supriyanto E., Nayan N.A., Jaafar R. PVDF sensor design and FPGA implementation of ultrasound power measurement, 2014, IEEE Conference on Biomedical Engineering and Sciences: “Miri, Where Engineering in Medicine and Biology and Humanity Meet”.
Tei Y.Z., Marsono M.N., Shaikh-Husin N., Hau Y.W. Network partitioning and GA heuristic crossover for NoC application mapping, 2013, IEEE International Symposium on Circuits and Systems.
Wong S., Ooi C.Y., Hau Y.W., Marsono M.N., Shaikh-Husin N. Feasible transition path generation for EFSM-based system testing, 2013, IEEE International Symposium on Circuits and Systems.
Hau Y.W., Marsono M.N., Ooi C.Y., Khalil-Hani M. A network-on-chip simulation framework for homogeneous multi-processor system-on-chip, 2011, Proceedings of International Conference on ASIC.
Hau Y.W., Khalil-Hani M., Marsono M.N. SystemC-Based hardware/software co-design of elliptic curve cryptographic system for network mutual authentication, 2011, Malaysian Journal of Computer Science, 24.
Ow T.W., Chia W.Y., Bakhteri R., Hau Y.W. SoC-based design of arrhythmia detector, 2011, 2014 2nd International Conference on Electronic Design (ICED 2014).
Hau Y.W., Khalil-Hani M., Marsono M.N. CODESL:A framework for system-level modelling, co-simulation and design-space exploration of embedded systems based on system-on-chip, 2010, ISMS 2010 – UKSim/AMSS 1st International Conference on Intelligent Systems, Modelling and Simulation.
Hau Y.W., Khalil-Hani M. SystemC-based HW/SW co-simulation platform for system-on-chip (SoC) design space exploration, 2009, International Journal of Information and Communication Technology, 2.
Khalil-Hani M., Irwansyah A., Hau Y.W. A tightly coupled finite field arithmetic hardware in an FPGA-based embedded processor core for elliptic curve cryptography, 2009, International Journal of Information and Communication Technology, 2.
Khalil-Hani M., Hau Y.W. SystemC HW/SW co-design methodology applied to the design of an Elliptic Curve crypto system on chip, 2008, Proceedings of the International Conference on Microelectronics (ICM).
Hau Y.W., Khalil-Hani M. SystemC-based HW/SW Co-simulation platform for system-on-Chip (SoC) design space exploration, 2008, 2008 International Conference on Electronic Design (ICED 2008).
Khalil M., Nazrin M., Hau Y.W. Implementation of SHA-2 hash function for a digital signature System-on-Chip in FPGA, 2008, 2008 International Conference on Electronic Design (ICED 2008).
Khalil-Hani M., Irwansyah A., Hau Y.W. A tightly coupled finite field arithmetic hardware in an FPGA-based embedded processor core for elliptic curve cryptography, 2008, 2008 International Conference on Electronic Design (ICED 2008).
Hani M.K., Wen H.Y., Paniandi A. Design and implementation of a private and public key crypto processor for next-generation it security applications, 2006, Malaysian Journal of Computer Science, 19.

To get to know, to discover to publish